We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 2.5 inch SATA enclosure with dual mSATA slots

Vszerda

Vszerda Dual mSATA JBOD RAID0 Bridge to 2.5 SATA Enclosure

SKU CH-XECK-6PZFT

Connects two mSATA SSDs as a single 2.5-inch SATA drive using JBOD or RAID0 modes

  • Supports two mSATA SSDs in a single 2.5 SATA drive bay
  • JBOD mode lets each drive operate independently
  • RAID 0 span combines both drives into one larger volume
  • Compatible with desktop and laptop SATA connections
  • Bridge adapter converts dual mSATA to standard SATA interface

Dual mSATA bridge enclosure

This Vszerda enclosure bridges two mSATA SSDs to a single 2.5 SATA connection. It presents the drives as a JBOD span or RAID 0 array to the host system. The adapter fits desktop or laptop SATA ports.

Suited for combining two mSATA drives

Builders who want to merge two mSATA SSDs into one logical volume will find this bridge useful. It is not for users who need to keep the drives visible as separate volumes. It also cannot accept M.2 or 2.5 SATA drives directly.

JBOD and RAID 0 operating modes

The controller exposes the paired SSDs either as independent JBOD drives or as a combined RAID 0 span depending on host configuration. This mode choice is the specification that determines whether the enclosure matches the intended storage layout.

Highlights

  • Supports two mSATA SSDs in a single 2.5 SATA drive bay
  • JBOD mode lets each drive operate independently
  • RAID 0 span combines both drives into one larger volume
  • Compatible with desktop and laptop SATA connections
  • Bridge adapter converts dual mSATA to standard SATA interface

Specifications

No published specifications for this item yet.

Questions about this item

What drive bay size does this 2.5 enclosure fit?

The enclosure is built to the 2.5 form factor so it mounts in any standard 2.5 drive bay or caddy.

How do I install the two mSATA SSDs and enable JBOD or RAID0?

Insert both mSATA cards into the onboard slots, secure them with the retaining screws, connect the enclosure to a SATA port, then configure JBOD or RAID0 in the host system BIOS or OS disk utility.

What maintenance will the bridge board need over time?

No scheduled maintenance is required; if a drive fails you simply replace the individual mSATA SSD while the bridge board stays in place.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.