We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DB9 male breakout board with green screw terminals inside a compact ABS case

Vszerda

Vszerda DB9 Breakout Connector RS232 D-SUB Male to Screw Terminals with Case

SKU CH-PDXV-64GK5

DB9 male serial adapter breaks out to screw terminals for 12–24 AWG wire in a compact ABS case

  • Solder-free wiring with screw terminals for 12-24AWG cable
  • Compact 58 x 35 x 21 mm case fits tight panels
  • Metal shell with anti-slip finish protects the connector
  • Supplied with three protective covers for unused ports
  • RoHS compliant copper contacts rated for 0.2 N·m torque

DB9 RS232 Breakout Connector

The Vszerda DB9 breakout board converts a male D-SUB serial port into screw terminals for solder-free wiring. A case is included and the body uses insulating material with an anti-slip surface. Copper alloy pins and brass cage hardware provide durable contact for industrial or bench use.

Wiring Terminals for 12-24AWG Wire

This adapter suits technicians who need quick, repeatable connections to legacy serial equipment without soldering. The screw terminals accept 12-24AWG conductors and the unit weighs 30g. Installers who require sealed or high-vibration connectors should look at a different solution.

Compact Enclosure with Cable Entries

The enclosure measures 58 x 35 x 21mm and offers cable holes of 5mm, 6mm, 7mm and 10mm for flexible routing. Fixing holes are 3mm diameter on a 6mm pitch for panel mounting. Torque is rated at 0.2N m so over-tightening must be avoided.

Highlights

  • Solder-free wiring with screw terminals for 12-24AWG cable
  • Compact 58 x 35 x 21 mm case fits tight panels
  • Metal shell with anti-slip finish protects the connector
  • Supplied with three protective covers for unused ports
  • RoHS compliant copper contacts rated for 0.2 N·m torque

Specifications

No published specifications for this item yet.

Questions about this item

What cable diameter fits the 5 mm, 6 mm, 7 mm or 10 mm entry holes on this DB9 breakout connector?

The case provides four cable holes sized at 5 mm, 6 mm, 7 mm and 10 mm so you can match the outer diameter of your serial cable before securing it.

Will the screw terminals accept the 16 AWG wires I already use for RS‑232 links?

Yes, the terminals are rated for 12–24 AWG in the highlights and 16–26 AWG in the detailed spec, covering 16 AWG comfortably.

How can I verify the adapter is passing signals correctly after wiring it?

Connect a loop-back plug between pins 2 and 3, then send data from your terminal program; characters echoed back confirm the TX and RX paths are intact.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.