We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB DB25 male breakout board with screw terminals in black ABS case

Vszerda

Vszerda DB25 Breakout Board Solder-Free Male Adapter 25-pin data adapter

SKU CH-1SK6-PBD3V

A solder-free DB25 male breakout board with labelled screw terminals, an insulated ABS case and all-copper contacts for 26-16 AWG wire up to 10 A

  • Solder-free terminal block speeds up wiring
  • All 25 DB25 pins clearly labelled on PCB
  • Insulating ABS+PC case with anti-slip surface
  • Pure copper nickel-plated contacts rated 10 A
  • Accepts 26-16 AWG wires in 3 mm holes

Solder-Free DB25 Male Adapter

The Vszerda DB25 breakout board converts a 25-pin serial port to screw terminals without soldering. All signal lines are clearly labelled on the PCB. An ABS and PC insulation case with anti-slip texture encloses the board. Nickel-plated copper pins and a copper base resist oxidation.

Build Integration and Clearance

The adapter measures 59 x 55.5 x 23 mm and weighs 60 g. A 10 mm cable entry hole accepts wires from 26 to 16 AWG. Terminal holes are 3 mm in diameter on a 5 mm pitch. Each terminal accepts 0.2 N·m (1.7 lb-in) of torque for secure connections.

Suitability and Limitations

Ideal for engineers wiring industrial control gear or legacy serial equipment where soldering is impractical. The 10 A rating supports typical signal and low-power loads. Builders needing female DB25 gender, higher pin counts or sealed connectors for harsh environments should look elsewhere.

Highlights

  • Solder-free terminal block speeds up wiring
  • All 25 DB25 pins clearly labelled on PCB
  • Insulating ABS+PC case with anti-slip surface
  • Pure copper nickel-plated contacts rated 10 A
  • Accepts 26-16 AWG wires in 3 mm holes

Specifications

No published specifications for this item yet.

Questions about this item

How much current can the 25-pin adapter carry continuously?

The adapter is rated for 10 A continuous current through its nickel-plated copper contacts.

How hot does the adapter get when running at full load all day?

With all-copper contact bases and an ABS-plus-PC insulating case, heat is conducted away from the terminals and the housing stays cool to the touch during sustained 10 A operation.

What wire gauges can I clamp into the screw terminals without soldering?

The terminals accept solid or stranded wire from 26 AWG up to 16 AWG, secured by the captive screws.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.