We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8644 to four SATA cable, woven mesh sheath, 3.2 ft

Vszerda

Vszerda CS0144 SFF-8644 to 4 SATA 3.2 ft cable

SKU CH-VVAK-PFR6N

Connects an SFF-8644 host port to four SATA drives at up to 6 GB/s over 3.2 ft

  • TypeMINI SAS
  • Color3.3ft
  • Length3.2
  • Connector DetailMini Sas
  • Terminal GenderMale-to-Female
  • Speed6 gigabytes_per_second
  • Connects HBA card to four SATA drives via SFF-8644 36-pin interface
  • Delivers up to 6 GB/s data rate with SAS 2.1 compliance
  • Woven mesh sheath and locking latches maintain airflow for 24/7 server operation
  • 2 ft length suits compact chassis cable routing
  • Universal SATA port compatibility across SSD and HDD targets

Cable purpose and fit

The Vszerda CS0144 connects a host bus adapter with an SFF-8644 port to four SATA drives. It is intended for server or RAID configurations that need a single mini SAS HD link fanned out to individual storage devices. Builders adding SATA SSDs or HDDs to an HBA card will use this cable.

Compatibility checks

Verify that your HBA or RAID controller presents an SFF-8644 36-pin receptacle before ordering. Each target drive must expose a standard SATA 7-pin data port. The cable supports SAS 2.1 signalling up to 6 GB/s, so the controller and drives should operate at that generation for full throughput.

Sustained operation

A woven mesh sheath and locking latches reduce airflow disruption and keep connections secure during continuous 24/7 duty. The assembly follows CineRAID build standards, meaning it is rated for round-the-clock data transfer without the signal degradation seen in lighter-duty fan-out cables.

Highlights

  • Connects HBA card to four SATA drives via SFF-8644 36-pin interface
  • Delivers up to 6 GB/s data rate with SAS 2.1 compliance
  • Woven mesh sheath and locking latches maintain airflow for 24/7 server operation
  • 2 ft length suits compact chassis cable routing
  • Universal SATA port compatibility across SSD and HDD targets

Specifications

BrandVszerda
ModelCS0144
TypeMINI SAS
Color3.3ft
Length3.2
Connector DetailMini Sas
Terminal GenderMale-to-Female
Speed6 gigabytes_per_second
Conductorlead
FeaturesHigh Speed

Questions about this item

Does the 3.2 ft cable come with any additional brackets or adapters?

The package contains the SFF-8644 to four SATA 7-pin cable only. No mounting brackets, power adapters or extra cables are included.

The listing shows a single 3.2 ft length; is that the only option available?

This model CS0144 is offered in the 3.2 ft length with a woven mesh sheath and locking latches on each connector.

The headline states 6 GB/s; what throughput should I expect when the cable is connected to a SAS 2.1 HBA and four SATA drives?

The cable is rated for up to 6 GB/s and built to SAS 2.1 compliance, so each of the four SATA lanes can run at the full 6 Gbit/s provided the host controller and drives support that speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.