Vszerda
Vszerda CN-044-TC001-XY 2Pin Terminal to Type-C Male 5pcs internal power cable
Five solderless adapters convert a 2-pin terminal into a reversible USB-C male plug for 5 V DC power up to 3 A
- ColorGreen
- Solder-free wiring via screw crimp terminals for quick DIY repairs
- Delivers up to 15 W at 5 V 3 A for fast charging
- Reversible USB-C plug inserts either way for easy connection
- Five adapters per pack suit multiple devices or spare parts
- Works with phones, laptops, tablets and any Type-C 5 V peripheral
Vszerda 2Pin to Type-C Power Adapter
This five-piece set converts a 2Pin terminal input into a Type-C male output for DIY power projects. It delivers DC 5V power to mobile devices, laptops, tablets and other Type-C peripherals without requiring any soldering.
Sustained 5V 3A delivery with PD 15W ceiling
The adapter supports a continuous throughput of up to 3A at 5V when paired with a USB 2.0 Type-C source and device. Power delivery tops out at 15W, so it handles steady charging loads but cannot negotiate higher PD voltages or currents.
Passive connector with reversible Type-C plug
No active circuitry means no fan noise or extra heat beyond the cable itself. The reversible Type-C male end inserts either way, while the screw crimp terminals secure bare wires for a solderless connection. It is limited to 5V power only and does not support data transfer or E-marker cables.
Highlights
- Solder-free wiring via screw crimp terminals for quick DIY repairs
- Delivers up to 15 W at 5 V 3 A for fast charging
- Reversible USB-C plug inserts either way for easy connection
- Five adapters per pack suit multiple devices or spare parts
- Works with phones, laptops, tablets and any Type-C 5 V peripheral
Specifications
| Brand | xiwai |
|---|---|
| Model | CN-044-TC001-XY |
| Color | Green |
Questions about this item
Does the 5 V 3 A rating generate noticeable heat when the adapter runs continuously?
The connector is rated for DC 5 V at up to 3 A, so sustained use at that level will produce some warmth, but the solderless screw terminals are designed to handle the current without overheating.
What power source must I already have to use the 2‑pin terminal input?
You need a DC 5 V supply that can deliver up to 3 A, such as a USB‑C charger or a 5 V rail from an existing power board, to feed the 2‑pin terminals.
Will this adapter work with a legacy USB‑C cable that lacks an E‑marker chip?
Yes, the solderless connector is only compatible with USB‑C cables that do not contain an E‑marker chip; cables with an E‑marker will not function.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



