We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten flat Cat6 patch cables, 6 ft each, blue with clear RJ45 plugs

Vszerda

Vszerda Cat6 network ethernet cable 6 ft 10-pack 1.8m 24 AWG 500 MHz UTP

SKU CH-DWX2-YY155

Ten Cat6 patch cables, each 1.8 m long with 24 AWG solid copper conductors and 500 MHz bandwidth for 10GBASE-T LAN links

  • Reliable wired connections backed by per-cable quality testing
  • 500 MHz bandwidth supports 10GBASE-T LAN speeds
  • 24 AWG solid copper conductors reduce signal loss
  • PE cross insulation isolates twisted pairs for lower crosstalk
  • Ten 6 ft cables cover multiple devices in one pack

Ten cables for wired LAN drops

This pack supplies ten Cat6 patch cables each measuring 1.8 metres. They terminate in standard RJ45 plugs and use 24 AWG solid copper conductors arranged in four unshielded twisted pairs with PE cross insulation. The cables are tested for secure wired connectivity in home and office networks.

Fits standard RJ45 ports on routers switches

Each cable plugs directly into the RJ45 sockets found on PCs servers printers routers and switch boxes. The UTP construction keeps the bundle flexible for routing through trunking or around desk legs without needing shielded pathways. Backward compatibility lets them work with existing Cat5e and Cat5 infrastructure.

Rated for 500 MHz sustained throughput

The design targets uniform impedance and very low return loss to maintain signal quality over longer runs. Crosstalk is reduced to support 10GBASE-T speeds across the full 500 MHz bandwidth during continuous data transfers. Solid copper conductors help preserve performance under sustained load.

Highlights

  • Reliable wired connections backed by per-cable quality testing
  • 500 MHz bandwidth supports 10GBASE-T LAN speeds
  • 24 AWG solid copper conductors reduce signal loss
  • PE cross insulation isolates twisted pairs for lower crosstalk
  • Ten 6 ft cables cover multiple devices in one pack

Specifications

No published specifications for this item yet.

Questions about this item

Will the 24 AWG solid copper conductors limit throughput on a 10GBASE-T link at 500 MHz?

The cable is rated for 500 MHz and supports 10GBASE-T, so the 24 AWG construction meets the standard for the specified frequency and speed.

Does running 10GBASE-T traffic all day make the jacket or connectors run hot?

Passive UTP cables generate no measurable heat; the 24 AWG solid copper conductors and PE cross insulation remain at ambient temperature under continuous load.

What devices must already have RJ45 ports for these cables to work?

Any LAN equipment — PCs, servers, printers, routers or switch boxes — with standard RJ45 sockets will connect directly with these Cat6 patch cables.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.