We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten white Cat6 keystone jacks with gold contacts

Vszerda

Vszerda Cat6 Keystone Jacks 10-Pack White

SKU CH-NK4Q-FMTZP

Ten white Cat6 keystone jacks with colour-coded 110/Krone blocks for 23/24 AWG solid wire and 50 µm gold contacts

  • Supports T568A and T568B wiring with colour-coded 110 blocks
  • 50 micron gold-plated contacts for reliable signal transmission
  • Verified to TIA/EIA 568-C.2 and RoHS compliant
  • Accepts 23 or 24 AWG solid Ethernet cables
  • Tool-free 110 or Krone dual-type termination with caps included

Cat6 Keystone Jacks 10-Pack

The Vszerda Cat6 Keystone Jacks come in a 10-pack of white RJ45 modular connectors. Each jack supports T568A and T568B wiring schemes with color-coded 110 IDC blocks. They accept 23 or 24 AWG solid Ethernet cables and feature 50 micron gold-plated contacts. The connectors are UL Listed and TIA/EIA 568-C.2 verified for structured cabling installations.

Installers terminating solid cable for patch

These jacks suit installers terminating solid Cat6 or Cat5e cable into standard keystone openings. They work with 110 or Krone punch-down tools and snap into compatible faceplates and surface-mount boxes. Builders using 24-port 1U patch panels, 6 or 8 gang wall-plate inserts, or stranded patch cables should look at other products because the supplier notes those are not compatible.

Verify your patch panel port spacing

Confirm that your patch panel or wall plate uses standard keystone cut-outs and is not a dense 24-port 1U model. Ensure you are terminating 23 or 24 AWG solid conductor cable, not stranded patch cord wire. Have a 110 or Krone punch-down tool ready for the IDC blocks and check that the gold-plated contacts meet your project specifications.

Highlights

  • Supports T568A and T568B wiring with colour-coded 110 blocks
  • 50 micron gold-plated contacts for reliable signal transmission
  • Verified to TIA/EIA 568-C.2 and RoHS compliant
  • Accepts 23 or 24 AWG solid Ethernet cables
  • Tool-free 110 or Krone dual-type termination with caps included

Specifications

No published specifications for this item yet.

Questions about this item

Which patch panels or wall plates will accept these keystone jacks?

They snap into standard keystone ports on most patch panels, surface-mount boxes and wall plates, but are not recommended for 24-port 1U patch panels, 1U APC units or 6- to 8-gang wall-plate inserts.

Can I terminate 23 AWG or 24 AWG solid cable with these jacks?

Yes, the dual IDC modules accept both 23 AWG and 24 AWG solid Ethernet cable using either 110 or Krone tooling.

How do I verify the link is running at the rated 1000 Mbps after installation?

Connect a Cat6 or higher cable to a gigabit switch or router and confirm the link LED shows 1000 Mbps or run a speed test that reaches near 1000 Mbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.