We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda Cat 6 Flat Ethernet Cable 33 ft

SKU CH-H8P8-REVMK

Flat Cat6 patch cable runs 33 ft along walls or under carpet with gold-plated RJ45 connectors and 250 MHz bandwidth

  • Supports 10-gigabit Ethernet speeds up to 250 MHz bandwidth
  • Gold-plated RJ45 connectors with 50 micron contact plating resist corrosion
  • 100% bare copper conductors deliver higher conductivity than CCA alternatives
  • Flat 30 AWG design runs neatly along walls and under carpets
  • 33 ft length with snagless clips simplifies home and office installations

What this cable does

This flat Cat 6 patch cable provides universal LAN connectivity for PCs, servers, printers, routers, switches, media players, consoles, PoE devices, NAS units and VoIP phones. It supports 10Base-T, 100BASE-TX, 1000Base-T and 10GBase-T standards with performance up to 250 MHz. The 33 ft length suits runs along walls, edges, corners or under carpet for a cleaner installation.

Thermals noise and power

As a passive copper cable it draws no power and produces no noise or heat during normal operation. The 30 AWG stranded conductors with 100% bare copper ensure minimal interference and reliable signal integrity across the 5.8 mm diameter. Gold-plated RJ45 contacts rated at 50 micron resist corrosion for consistent long-term performance without active cooling.

Clips and snagless boots

Each connector includes a protective boot and clip that prevents the latch from catching on other cables during routing or removal. This makes the cable easier to pull through tight spaces and reduces the risk of damaged ports or broken tabs. The flat profile combined with snagless ends simplifies installation under carpet or along baseboards without special tools.

Highlights

  • Supports 10-gigabit Ethernet speeds up to 250 MHz bandwidth
  • Gold-plated RJ45 connectors with 50 micron contact plating resist corrosion
  • 100% bare copper conductors deliver higher conductivity than CCA alternatives
  • Flat 30 AWG design runs neatly along walls and under carpets
  • 33 ft length with snagless clips simplifies home and office installations

Specifications

No published specifications for this item yet.

Questions about this item

How do I install this flat Cat6 cable without damaging the 30 AWG stranded conductors?

Route the 5.8 mm flat cable along walls, edges or under carpet; make gentle curves instead of tight bends to protect the four twisted pairs and gold-plated RJ45 clips.

What maintenance or replacement will this Cat6 patch cord need over time?

Inspect the snagless RJ45 clips and 50 µm gold contacts periodically; replace the cable if the flat jacket shows cuts or the connectors no longer latch securely.

What limit appears first when this cable runs sustained 10 Gbps traffic?

The 250 MHz bandwidth rating and 30 AWG stranded conductors set the practical distance ceiling for 10GBASE-T, so keep runs at or below the 33 ft length supplied.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.