We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda Cat 6 Flat Ethernet Cable 3.3 ft

SKU CH-1ZKN-FB2NR

Flat Cat 6 patch cable with gold-plated RJ45 connectors and solid bare-copper conductors for up to 250 MHz bandwidth

  • Length3.3 ft.
  • High-speed Cat 6 supports up to 250 MHz bandwidth
  • Gold-plated RJ45 connectors with 50 micron gold resist corrosion
  • 100 % bare copper conductors ensure reliable signal quality
  • Flat 3.3 ft design runs neatly under carpets and along walls
  • Snagless clips protect the latch during frequent connects

3.3 ft Cat 6 Flat Cable

This 3.3 ft Cat 6 flat Ethernet cable connects PCs, servers, printers, routers, switches, consoles, PoE devices, NAS and VoIP phones. The flat profile runs along walls, edges, corners or under carpet for a tidy installation. Gold-plated RJ45 contacts and snagless clips ensure reliable insertion. It is built with 100 % bare copper conductors for durability.

250 MHz bandwidth headroom

Rated to 250 MHz, the cable supports 10Base-T, 100BASE-TX, 1000Base-T and 10GBase-T links. The 30 AWG stranded conductors and UTP construction keep noise low across the full bandwidth. At 3.3 ft the run stays well within Cat 6 channel limits for 10 Gbps. Longer distances would require a thicker gauge or shielded design.

30 AWG flat UTP construction

The 30 AWG stranded bare copper pairs and 5.8 mm flat jacket make the cable flexible enough for tight routing. Builders who need in-wall fire ratings, outdoor burial or shielded pairs for noisy environments should choose a different cable type.

Highlights

  • High-speed Cat 6 supports up to 250 MHz bandwidth
  • Gold-plated RJ45 connectors with 50 micron gold resist corrosion
  • 100 % bare copper conductors ensure reliable signal quality
  • Flat 3.3 ft design runs neatly under carpets and along walls
  • Snagless clips protect the latch during frequent connects

Specifications

Length3.3 ft.

Questions about this item

Will the 3.3 ft Cat6 flat cable reach from my router to a nearby switch without excess slack?

At 3.3 ft the cable suits short runs between a router and a switch on the same desk or shelf; the flat profile lets it hug skirting boards or slide under a carpet for a tidy install.

How can I verify the cable delivers the 250 MHz / 10 Gbps performance printed on the spec sheet?

Connect it between two 10 GbE ports, run a throughput test such as iperf3, and confirm sustained speeds near 10 Gbps with low retransmits; the 50 µm gold contacts and 100 % bare copper conductors are built to meet the 250 MHz Cat6 rating.

Does the pack include only the single 3.3 ft patch cord or are clips and extra connectors supplied?

The box contains one 3.3 ft Cat6 UTP patch cable with snagless RJ45 plugs already fitted; no additional clips, couplers or tools are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.