We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short multicolour 18AWG adapter cable with 4-pin female to 8-pin male connectors

Vszerda

Vszerda ATX 4-Pin to EPS 8-Pin 6 inch internal power cable

SKU CH-HN1T-84M8B

Converts a PSU 4-pin ATX 12V connector to an 8-pin EPS 12V motherboard socket using 18AWG UL1007 wire in a 6 inch length

  • Converts 4-pin PSU to 8-pin EPS for newer motherboards
  • 18AWG UL1007 tinned copper wire handles 12V DC reliably
  • Short 6 inch length keeps cable routing tidy
  • Female 4-pin ATX P4 to male 8-pin EPS connector fit
  • Adapter enables CPU power on boards needing EPS 8-pin

Vszerda ATX 4-Pin to EPS 8-Pin Adapter

This 6-inch cable converts a power supply's 4-pin ATX 12V connector into an 8-pin EPS 12V plug for motherboard compatibility. It uses 18AWG UL1007 tinned copper wire rated for 12V DC operation. The short length suits compact builds where the CPU power header sits close to the PSU.

Ideal for builders adapting older PSUs

Suits anyone fitting a modern motherboard that requires an 8-pin EPS 12V input while using a power supply equipped only with a 4-pin ATX 12V connector. Not suitable for systems needing a longer reach between the PSU and the CPU socket or for configurations where the native 8-pin cable is already present.

6-inch 18AWG UL1007 cable length

The fixed 6-inch length and 18AWG UL1007 wire gauge determine whether the adapter reaches your motherboard's 8-pin header without strain. Verify the routing distance in your chassis before purchase to ensure the short cable spans the gap between the PSU's 4-pin output and the CPU power socket.

Highlights

  • Converts 4-pin PSU to 8-pin EPS for newer motherboards
  • 18AWG UL1007 tinned copper wire handles 12V DC reliably
  • Short 6 inch length keeps cable routing tidy
  • Female 4-pin ATX P4 to male 8-pin EPS connector fit
  • Adapter enables CPU power on boards needing EPS 8-pin

Specifications

No published specifications for this item yet.

Questions about this item

Will this adapter fit the 4-pin P4 connector on my existing power supply?

Yes, connector A is a 4-pin P4 ATX 12V female that plugs directly into your PSU's existing CPU power header.

Can I keep using my current 18AWG PSU cables with this 6 inch adapter?

The adapter uses 18AWG tinned copper wire rated UL1007, matching typical PSU cable gauge for a consistent 12V DC path.

How do I confirm the EPS 8-pin side is delivering power to the motherboard?

The system will POST and the CPU will receive 12V DC through the 8-pin male connector once the adapter is seated correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.