We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ATX 24-pin to 20+4-pin power adapter cable 30cm

Vszerda

Vszerda ATX 24Pin to 20+4Pin Power Cable 30cm

SKU CH-DZGX-5S2S8

Converts a 20-pin PSU connector to a 24-pin motherboard socket with a 30cm cable

  • Converts 20-pin PSU to 24-pin motherboard connector
  • 30 cm length fits compact or standard ATX cases
  • 100 % new cable tested before shipment
  • Replaces cracked or faulty ATX power cables
  • Male 20-pin to 20+4-pin female adapter design

ATX 24Pin to 20+4Pin adapter

This internal power cable converts a 20-pin male PSU connector into a 24-pin ATX motherboard socket. It suits builders who need to connect an older power supply to a modern board. The 30cm length keeps cable routing tidy inside the case. No other connectors or adapters are included in the pack.

Pin-count compatibility

The single specification that decides fit is the 20-pin to 24-pin conversion; the cable only works when the PSU provides exactly 20 pins and the motherboard requires the full 24-pin layout. It does not add extra power phases or change voltage delivery. Buyers who need a native 24-pin PSU cable or a different pin arrangement cannot use this part.

Build integration

The short 30cm cable reduces clutter and leaves more room for airflow around the motherboard edge. It requires the PSU to be switched off during installation and the manufacturer notes that special skill is needed for proper fitting. Systems that already have a native 24-pin PSU connector do not need this adapter.

Highlights

  • Converts 20-pin PSU to 24-pin motherboard connector
  • 30 cm length fits compact or standard ATX cases
  • 100 % new cable tested before shipment
  • Replaces cracked or faulty ATX power cables
  • Male 20-pin to 20+4-pin female adapter design

Specifications

No published specifications for this item yet.

Questions about this item

What does the 20 Pin Male to 24 Pin conversion actually do for my power supply?

It lets a power supply with a 20 pin main connector plug into a motherboard that requires a 24 pin ATX socket, adding the four extra pins needed for full compatibility.

Will the 30cm length reach from a bottom mounted PSU to a top mounted 24 pin header in a mid tower case?

At 30cm the cable is quite short; it suits compact builds or extensions but will not span the full height of a typical mid tower from bottom PSU to top motherboard connector.

What clearance do I need around the 24 pin plug to fit this adapter onto my motherboard?

The 24 pin end follows the standard ATX keying, so you need the usual space around the motherboard socket for the latch and pins; no extra bulk beyond a normal 24 pin connector is added.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.