We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30 cm ARGB splitter cable with one female and three male 3-pin connectors

Vszerda

Vszerda ARGB Splitter Cable 5V 3-Pin 1 to 3 Internal Power Cable

SKU CH-QR22-7RNMY

Splits one 5 V 3-pin ARGB header into three 30 cm male connectors for addressable LED strips or fans

  • Connect three ARGB devices from one 5V header
  • 30 cm cable reaches across full-tower chassis
  • 26 AWG tinned copper conductors handle 80 °C operation
  • Keyed male pins align with arrows for tool-free install
  • Soft PVC sleeve protects wires from dust and breakage

ARGB 1-to-3 Splitter for 5V Headers

The Vszerda cable splits one motherboard 5 V 3-pin addressable RGB header into three identical connectors. It is intended for builders who want to run multiple ARGB fans or LED strips from a single header on ASUS, MSI, Gigabyte or ASRock boards. Buyers needing 12 V 4-pin RGB control cannot use this product.

Three Male Connectors Included

The package supplies three separate 3-pin male plugs that attach to the splitter’s female ends. This lets you connect up to three ARGB devices such as 5050, 3528 or 2835 LED strips without soldering. No software or controller is bundled; the motherboard’s own RGB utility handles lighting effects.

Tool-Free Arrow-Matched Installation

Each plug carries an arrow indicator that must align with the corresponding arrow on the header for correct polarity. The 30 cm 26 AWG tinned-copper cable is sleeved in soft PVC and rated to 80 °C. A common error is reversing a connector, which prevents the attached devices from lighting.

Highlights

  • Connect three ARGB devices from one 5V header
  • 30 cm cable reaches across full-tower chassis
  • 26 AWG tinned copper conductors handle 80 °C operation
  • Keyed male pins align with arrows for tool-free install
  • Soft PVC sleeve protects wires from dust and breakage

Specifications

No published specifications for this item yet.

Questions about this item

Will the 26AWG tinned-copper wires or the 3-pin connectors need replacing after a few years?

The cable uses 26AWG tinned-copper conductors and soft-PVC sleeving rated to 80 °C; no periodic replacement is expected under normal case temperatures.

What stops me from daisy-chaining more splitters off the single 5V header?

The motherboard’s 5V ARGB header current limit will be reached first; exceeding it can cause voltage drop or header shutdown.

Does the 30 cm cable run warm or add audible noise when the ARGB strips stay lit all day?

The passive 26AWG wiring produces no noise and negligible heat at typical ARGB currents; the 80 °C temperature rating is far above normal operating temps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.