We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ARGB hub in transparent PMMA case with magnetic standoff and SATA cable

Vszerda

Vszerda ARGB Hub 5V 3Pin 11 Ports Splitter Magnetic Standoff PMMA Case SATA 1.64ft Extension Cable

SKU CH-6B1D-7SJR5

A SATA-powered 5V ARGB hub with 11 ports to control 10 addressable RGB devices from one motherboard header, plus magnetic standoffs, a PMMA case and a 1.64ft extension cable

  • Connects 10 addressable RGB fans or strips to one motherboard header
  • 11 total ports including the input for maximum expansion flexibility
  • SATA power connector delivers stable current to every attached device
  • Magnetic standoff and adhesive pad secure the hub inside any chassis
  • 64ft extension cable included for convenient routing to distant components

ARGB Hub for 5V Addressable RGB Components

The Vszerda ARGB hub splits a single 5V 3-pin motherboard header into 11 ports, with 10 channels available for fans or LED strips. A SATA power connection supplies stable current to every attached device. It is built for users who want synchronised lighting across multiple addressable RGB parts.

10-Channel Capacity and SATA Power Headroom

The hub comfortably drives 10 ARGB fans or strips at once while drawing auxiliary power from a SATA connector. The single 5V header on the motherboard remains the control bottleneck; adding more than 10 devices exceeds the available ports. The design does not support 12V RGB components at all.

5V 3-Pin Addressable RGB Interface Limits

The splitter works only with 3-pin 5V addressable RGB headers or controllers; connecting it to a 12V RGB header will cause a mismatch. An included 1.64ft extension cable provides extra reach for the motherboard connection. Magnetic standoffs and a PMMA case secure the hub inside the chassis without tools.

Highlights

  • Connects 10 addressable RGB fans or strips to one motherboard header
  • 11 total ports including the input for maximum expansion flexibility
  • SATA power connector delivers stable current to every attached device
  • Magnetic standoff and adhesive pad secure the hub inside any chassis
  • 64ft extension cable included for convenient routing to distant components

Specifications

No published specifications for this item yet.

Questions about this item

Will the 11-port ARGB hub share a single 5V 3-pin header with my existing motherboard RGB controller?

Yes, the hub connects to one 5V addressable RGB header and splits it across 10 device ports plus the extension cable for synchronous control.

How can I verify the 1.64ft extension cable and all 10 fan ports are syncing correctly after installation?

Align the connector arrows, power the system, then use your motherboard ARGB software to run a test pattern — all connected strips and fans should display the same effect simultaneously.

Does the package include the SATA power lead and mounting hardware, or must I buy them separately?

The hub has a built-in SATA power interface, magnetic standoffs and a sticky pad in the PMMA case; the 1.64ft extension cable is also included, so no extra parts are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.