We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white-sleeved PCIe 8-pin extension cables with translucent ARGB fibre strip

Vszerda

Vszerda ARGB 3x 8-Pin GPU Power Cable Kit 10.43 Inches

SKU CH-GDJA-8C0Q1

Three PCIe 8-pin extension cables with 5 V ARGB sync and 10.43 inch length

  • Three PCIe 8-pin extensions reach distant GPU power sockets 10.43 Inches
  • 5V 3-pin ARGB sync matches motherboard lighting effects automatically
  • Separate 0.6 mm optic-fibre and power layers prevent signal interference
  • Kit includes three male-to-female cords for multi-GPU or daisy-chain builds
  • Minimum 90 degree bend radius requires adequate case clearance for safe routing

Vszerda ARGB 8-Pin GPU Power Cable Kit

This kit includes three PCIe 8-pin male-to-female extension cables designed to connect a power supply to a graphics card. Each cable measures 10.43 inches in length and features integrated addressable RGB lighting. The cables use a 0.6 mm optic fibre layer separated from the power supply layer for signal clarity. A 5V 3-pin ARGB header on a compatible motherboard is required for lighting control.

Builders adding ARGB lighting to GPU power runs

The set suits builders who want synchronised lighting on their GPU power cables and have a motherboard with a 5V 3-pin ARGB header. It is not for systems lacking a 5V ARGB header or for installations where cables cannot be routed without bending tighter than 90 degrees. Cases with very tight clearances around the GPU power connectors should be avoided.

10.43-inch cable length and 90-degree bend limit

The fixed 10.43-inch length determines reach between the PSU and the graphics card. The optic fibre and power layers must not be bent to a radius tighter than 90 degrees, so the case must provide enough space for gentle curves. Verify routing space before purchase.

Highlights

  • Three PCIe 8-pin extensions reach distant GPU power sockets 10.43 Inches
  • 5V 3-pin ARGB sync matches motherboard lighting effects automatically
  • Separate 0.6 mm optic-fibre and power layers prevent signal interference
  • Kit includes three male-to-female cords for multi-GPU or daisy-chain builds
  • Minimum 90 degree bend radius requires adequate case clearance for safe routing

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the ARGB lighting syncs with my motherboard after installing the Vszerda cable kit?

Connect the 5V 3-pin ARGB headers to a compatible motherboard header, then use the board's RGB control software to confirm the three cables respond to colour and effect changes.

What connectors and cables are included in the box, and do I need a specific motherboard header?

The kit contains three PCIe 8-pin male-to-female extension cords, each 10.43 inches long with a 0.6 mm optic fibre layer; a motherboard with a 5V 3-pin ARGB header is required for lighting control.

Which version should I choose if my case has limited clearance behind the graphics card?

These cables are 10.43 inches long and must not be bent tighter than a 90 degree radius, so measure the space between your GPU power socket and the side panel before selecting this kit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.