We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular adapter with SATA and dual IDE ports, USB 3.0 cable and 12V power supply

Vszerda

Vszerda AE01-drive adapter USB 3.0 to SATA IDE converter with 12V power

SKU CH-NHC4-1VBFY

Connects 2.5, 3.5 and 5.25 SATA or IDE drives to USB 3.0 at 5 Gbps with a 12V power supply

  • ColorBlack
  • Speed5 gigabytes_per_second
  • ConductorAcrylonitrile Butadiene Styrene (ABS)
  • Connect 2.5", 3.5" and 5.25" SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP support
  • Power 3.5" drives using the included 12V supply and 4-pin cable
  • Operate one IDE and one SATA drive at the same time
  • Works with Windows, macOS and Linux without extra drivers

Versatile Drive Connectivity

The Vszerda AE01-drive adapter connects 2.5, 3.5 and 5.25 inch SATA or IDE drives to a computer through a USB 3.0 port. It suits technicians recovering data from legacy disks and users repurposing old drives as external storage. The package includes the adapter, a USB 3.0 cable, a 4-pin Molex power cable and a 12V external power supply.

Sustained Transfer Behaviour

The adapter operates at up to 5 Gbps and supports UASP, reducing processor overhead by 40 percent compared with traditional USB 3.0 operation. It runs one IDE and one SATA drive simultaneously with plug-and-play and hot-swap capability, allowing continuous backup or formatting sessions without rebooting the host system.

Six-Terabyte Capacity Limit

The single specification that decides suitability is the 6TB maximum drive capacity supported across all connected SATA and IDE devices. Drives larger than this limit will not be recognised, so buyers with higher-capacity media must choose a different solution.

Highlights

  • Connect 2.5", 3.5" and 5.25" SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP support
  • Power 3.5" drives using the included 12V supply and 4-pin cable
  • Operate one IDE and one SATA drive at the same time
  • Works with Windows, macOS and Linux without extra drivers

Specifications

BrandVszerda
ModelAE01-drive adapter
ColorBlack
Speed5 gigabytes_per_second
ConductorAcrylonitrile Butadiene Styrene (ABS)

Questions about this item

Does the 12V power adapter run hot or make noise when a 3.5" drive is connected all day?

The external 12V supply is a compact wall wart with no fan, so it stays silent and only warms slightly under continuous load.

What must I already have to use the AE01 adapter with a 2.5" SATA SSD?

A computer with a free USB port and the 2.5" SATA drive itself; the adapter draws all required power from the USB 3.0 connection.

Can I keep my old 40-pin IDE drive and a SATA drive plugged in at the same time?

Yes — the adapter operates one IDE and one SATA drive simultaneously over a single USB 3.0 link.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.