We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda ADP6ST0 SATA 1-to-5 multiplier card

SKU CH-79JZ-J56N2 MPN ADP6ST0

Connects one SATA port to five drives using a JMicron JMB575 controller with 6.0 Gbps support and hot-swap capability

  • Colordefault
  • Conductorcopper
  • Expands one SATA port to five drives via PM support
  • JMicron JMB575 controller enables 6.0 Gbps SATA III performance
  • Compliant with Serial ATA Port Multiplier and Selector specs
  • Hot-swap and staggered spin-up support protect drives during changes
  • Includes USB DC power cable and mounting screws for installation

SATA 1-to-5 port multiplier

The Vszerda ADP6ST0 expands a single SATA 3.0 host port into five device ports using a JMicron JMB575 controller. It operates at 6.0 Gbps and supports port multiplier, port selector and PHY electrical specifications. The card includes a USB DC power cable, a connection cable and mounting screws.

Motherboards with multiplier support

This card suits builders whose motherboard or host controller explicitly supports SATA port multiplier function; without that support only one drive will be visible. It is not for systems that lack multiplier capability or for users who need to connect drives through a different host interface.

JMicron JMB575 controller

The onboard JMB575 chip provides the multiplier logic and handles 6.0 Gbps signalling with automatic impedance calibration and spread-spectrum clocking. It also enables hot-swap, staggered spin-up and low-power modes when the host platform allows them.

Highlights

  • Expands one SATA port to five drives via PM support
  • JMicron JMB575 controller enables 6.0 Gbps SATA III performance
  • Compliant with Serial ATA Port Multiplier and Selector specs
  • Hot-swap and staggered spin-up support protect drives during changes
  • Includes USB DC power cable and mounting screws for installation

Specifications

BrandVszerda
ModelASHATA4hie1km370
Colordefault
Conductorcopper

Questions about this item

How many drives can the JMB575 multiplier present to the host at once?

The JMB575 port multiplier can present up to 5 drives to a host port that supports SATA multiplier function.

What power input does the card need for all-day operation?

A 2.5 V DC power cable is included and must be connected to the card for stable operation.

Which host-side feature must my motherboard or HBA already provide?

The host port must support the SATA Port Multiplier function; without it only a single drive will be detected.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.