We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 30 cm cables with 90 degree down-bend RJ45 male plugs and 8-pin screw terminals

Vszerda

Vszerda 90 Degree Down Bend Cat5 RJ45 Male to 8-Pin Screw Terminal Cable 30cm 2 Pack

SKU CH-RWKW-KWQT1

A 30 cm Cat5 extension with a 90-degree down-bend RJ45 plug and screw-terminal block for tool-free wiring

  • TypeEthernet
  • Connector ARJ45
  • ColorRJ45 male (Down bend)
  • Features, , , ,
  • Solder-free screw terminals speed installation
  • 90-degree down bend fits tight spaces
  • Cat5 straight-through wiring follows T568B standard
  • Shielded RJ45 plug resists signal interference
  • 30 cm length suits short-run extensions

Ideal for tight-panel installs

This 90-degree down-bend RJ45 male to 8-pin screw-terminal cable fits where straight plugs foul cabinet doors or DIN rails. The 30 cm Cat5 tail carries Ethernet signals to routers, notebooks, TV boxes and printers without soldering. Two cables are supplied for dual runs or spares.

Wired to T568B only

The plug follows the EIA/TIA T568B pinout; mixing T568A at one end and T568B at the other will break the link. Shielded 8P8C contacts and a fixed interface reject external electromagnetic interference for a stable signal.

Screwdriver-only termination

Strip each solid or stranded conductor, insert into the green screw terminals and tighten — no crimp tool or welding required. The terminals can be reopened repeatedly for rewiring. Allow 45 mm clearance behind the plug for the down-bend radius.

Highlights

  • Solder-free screw terminals speed installation
  • 90-degree down bend fits tight spaces
  • Cat5 straight-through wiring follows T568B standard
  • Shielded RJ45 plug resists signal interference
  • 30 cm length suits short-run extensions

Specifications

BrandzdyCGTime
TypeEthernet
Connector ARJ45
ColorRJ45 male (Down bend)
Features, , , ,

Questions about this item

What does the 90 degree down bend do when the cable is plugged in?

The 90 degree down bend points the cable downward from the RJ45 port, reducing strain on the connector and saving space behind equipment.

Which wiring standard does the Cat5 cable follow and what does that limit?

The cable uses the EIA/TIA T568B standard; both ends must use the same standard, so it cannot be mixed with T568A wiring.

How much clearance is needed for the screw terminal block?

The 30 cm cable ends in an 8-pin screw terminal block that accepts solid or stranded wire secured by tightening each screw with a screwdriver.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.