Vszerda
Vszerda 90 Degree DB9 RS232 Male-Female Serial Adapter .7in
A 90-degree DB9 male-to-female serial adapter with a .7-inch low-profile design for tight spaces
- ColorBlack
- Specifications5.0 in x 3.0 in x 0.7 in
- Connect cables at 90 degrees for tight spaces
- Low-profile .7 inch design fits against walls
- DB9 male to female RS232 serial connection
- Plug and play installation requires no drivers
- Supports 1080p high-speed signal transmission
Right-Angle DB9 Serial Adapter
The Vszerda adapter provides a 90-degree DB9 male-to-female connection for RS-232 serial equipment. It lets users route cables at a right angle behind a computer, printer or other device. The low-profile design fits tight spaces such as against a wall. The coupler is ready to use without any driver installation.
Compact Black Coupler Build
The moulded black housing measures 5.0 in by 3.0 in by .7 in and weighs very little. Gold-plated pins inside the DB9 male and female ends resist corrosion and maintain signal integrity. The right-angle orientation reduces strain on the port and prevents cables from protruding straight out. It acts as a gender changer and short extension in one piece.
RS-232 9-Pin Compatibility
This adapter carries standard RS-232 signals across all nine pins of the DB9 interface. It supports legacy serial peripherals such as modems, industrial controllers and older networking gear. The part is not suitable for parallel, USB or video connections. Buyers needing a straight-through or opposite-angle version should select a different model.
Highlights
- Connect cables at 90 degrees for tight spaces
- Low-profile .7 inch design fits against walls
- DB9 male to female RS232 serial connection
- Plug and play installation requires no drivers
- Supports 1080p high-speed signal transmission
Specifications
| Brand | Vszerda |
|---|---|
| Model | 8541672918 |
| Part Number | 4328317964 |
| Color | Black |
| Specifications | 5.0 in x 3.0 in x 0.7 in |
Questions about this item
Does the 90-degree RS-232 angle clear a .7 in gap behind the panel?
Yes, the adapter is .7 in deep so it fits flush against a wall or back-panel cut-out while keeping the DB-9 male plug fully seated.
What are the exact outside dimensions of the moulded housing?
The black housing measures 5.0 in long by 3.0 in wide by .7 in thick, matching the listed 5.0 in x 3.0 in x .7 in spec.
Is any driver or jumper setting required before plugging the DB-9 male into the port?
No, the adapter is a straight-through gender changer; installation is plug-and-play with no software or hardware configuration needed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



