We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angle ATX 24-pin power adapter board

Vszerda

Vszerda 90 Degree ATX 24Pin Adapter internal power cable

SKU CH-H493-JQNPS

A 90-degree ATX 24-pin adapter that reorients the power connector for tight chassis clearance

  • Changes cable direction 90 degrees for tight chassis
  • Plug-and-play 24-pin connector fits any ATX motherboard
  • High-grade materials maintain signal integrity and durability
  • Works with E-ATX, ATX and Micro-ATX boards
  • Install stepwise, wait 10 seconds to prevent shorts

90-Degree ATX 24-Pin Adapter

The Vszerda adapter redirects a standard 24-pin ATX power cable by 90 degrees. It solves clearance problems in chassis with limited height by changing the cable orientation from vertical to horizontal. The board uses a male-to-female layout that plugs directly into the motherboard socket. It weighs approximately 30 g and ships as a single unit.

Builders with tight PSU clearance

This adapter suits anyone fitting an ATX power supply into a compact case where the 24-pin connector would otherwise press against a side panel or radiator. It works with E-ATX, ATX and Micro-ATX motherboards that use the standard 24-pin interface. Builders who have ample vertical space above the motherboard socket do not need this part.

Simple installation with a safety step

Installation is plug-and-play and requires no software or tools. The supplier notes that the adapter must be fitted step by step to avoid shorting pins; the power cable should be removed and the system left for 10 seconds before the board is seated. Once aligned, the connector locks into the motherboard like a standard 24-pin plug.

Highlights

  • Changes cable direction 90 degrees for tight chassis
  • Plug-and-play 24-pin connector fits any ATX motherboard
  • High-grade materials maintain signal integrity and durability
  • Works with E-ATX, ATX and Micro-ATX boards
  • Install stepwise, wait 10 seconds to prevent shorts

Specifications

No published specifications for this item yet.

Questions about this item

What motherboard power connector must my board provide for this 24-pin 90-degree adapter to fit?

Your motherboard needs a standard 24-pin ATX power socket; the adapter plugs directly into that port and redirects the cable 90 degrees.

Will this right-angle adapter work with an existing ATX power supply that already has a straight 24-pin cable?

Yes, the male end of the adapter accepts any standard 24-pin PSU cable while the female end connects to the motherboard, rotating the cable horizontally.

After installing the adapter, how can I verify the connection is secure before powering on?

Ensure the adapter is fully seated on both the motherboard header and the PSU cable, wait ten seconds after removing power, then confirm no pins are bent or shorted.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.