We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort cable with aluminium connectors, 16.4 ft length

Vszerda

Vszerda 8K 60Hz DisplayPort 1.4 Cable 16.4FT

SKU CH-FY57-7558J

A 16.4 ft DisplayPort 1.4 cable delivering 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz with 32.4 Gbps bandwidth, HDR and VRR support

Cable Length 16.4 Feet

  • 8K resolution at 60 Hz for ultra-sharp visuals
  • 4K at 144 Hz and 2K at 165 Hz for smooth gaming
  • 4 Gbps HBR3 bandwidth enables high refresh rates
  • eARC with Dolby Atmos and 7.1 audio for immersive sound
  • 4 ft length with aluminium alloy connectors for durable reach

What this cable does and who needs it

This DisplayPort 1.4 cable carries 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz over a 16.4 ft run. It is built for gamers and creators who need high refresh rates and HDR from a single long link. The bi-directional design works with PCs, laptops, monitors and projectors that have a full-size DisplayPort socket. Buyers who need a shorter run or a different connector type should look elsewhere.

Thermals noise and power in normal use

The cable is passive and draws no external power, so it adds no heat or fan noise to the system. Oxygen-free copper conductors and upgraded anti-bending shielding keep the 32.4 Gbps HBR3 signal stable across the full length. An aluminium alloy shell protects each connector from repeated insertion cycles. No active electronics means there is nothing to overheat or fail under load.

The specification that decides fit

The cable is certified to the DisplayPort 1.4 standard with HBR3 bandwidth of 32.4 Gbps, enabling 8K 7680×4320 at 60 Hz with 10-bit colour and DSC 1.2 compression. It also meets HDCP 2.2 and supports eARC for 7.1 and 5.1 digital audio including Dolby Atmos. If your source or display only implements DisplayPort 1.2 or lower, the maximum resolution and refresh rate will be limited to what that version allows.

Highlights

  • 8K resolution at 60 Hz for ultra-sharp visuals
  • 4K at 144 Hz and 2K at 165 Hz for smooth gaming
  • 4 Gbps HBR3 bandwidth enables high refresh rates
  • eARC with Dolby Atmos and 7.1 audio for immersive sound
  • 4 ft length with aluminium alloy connectors for durable reach

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the 16.4FT DisplayPort 1.4 cable to my 8K monitor and what is the common mistake?

Plug the male DP 1.4 connectors into the GPU and monitor DP 1.4 ports; the step people miss is selecting 8K 60Hz 10-bit RGB 4:4:4 with DSC 1.2 enabled in the driver control panel.

What part of this 32.4Gbps HBR3 cable wears out first and when should I replace it?

The gold-plated male connectors and latch mechanism endure the most stress; inspect the locking tabs and contact pins every 18 months and replace if insertion feels loose or 8K 60Hz signal drops appear.

At what point does the 16.4FT length limit 8K 60Hz HDR stability during long sessions?

The 32.4 Gbps HBR3 budget is fully used by 8K 60Hz 10-bit HDR with DSC 1.2; sustained loads can trigger FEC corrections first, so keep the cable away from power bricks and avoid tight bends near the aluminum alloy shells.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.