We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black cables with 4-pin floppy and 15-pin SATA connectors

Vszerda

Vszerda 8541686762 4 Pin Floppy to 15 Pin SATA Power Cable 2-Pack

SKU CH-AT5G-V9XQY

Converts a 15-pin SATA power connector to a 4-pin floppy drive plug, 8-inch length, two cables included

  • Type???
  • ColorBlack
  • Connector Detail4 Pin Floppy Drive to 15 Pin Sata Male
  • Terminal GenderMale-to-Male
  • Features?
  • Converts 15-pin SATA power to 4-pin floppy drive
  • 8-inch cable keeps internal wiring tidy
  • Male-to-male connectors fit standard power sockets
  • Two cables included for multiple device installs
  • Black finish blends with typical case interiors

4-Pin Floppy to 15-Pin SATA Power Adapter

This two-pack converts a standard 15-pin SATA power connector into a 4-pin floppy-style plug. It suits builders who need to power legacy drives or accessories from a modern PSU. The short length keeps cable routing tidy inside compact cases. Buyers needing longer reach or right-angle connectors will not find them here.

Passive Power Delivery with No Active Cooling

The adapter draws power directly from the PSU rail without added circuitry, so it adds no fan noise or thermal load. Current capacity follows the source connector rating and wire gauge. No external power brick or software control is involved. Installers should verify their PSU can supply the required amperage for attached devices.

Two Identical Cables for Dual-Drive Setups

The pack includes two 8-inch male-to-male cables, letting you power two floppy-type devices simultaneously. No drivers, firmware or configuration utilities are bundled. Each cable is a simple pass-through; it does not convert voltage levels or add signalling. Spare cables remain useful for future legacy hardware additions.

Highlights

  • Converts 15-pin SATA power to 4-pin floppy drive
  • 8-inch cable keeps internal wiring tidy
  • Male-to-male connectors fit standard power sockets
  • Two cables included for multiple device installs
  • Black finish blends with typical case interiors

Specifications

BrandzdyCGTime
Model8541686762
Type???
ColorBlack
Connector Detail4 Pin Floppy Drive to 15 Pin Sata Male
Terminal GenderMale-to-Male
Features?

Questions about this item

How do I connect the 4-pin floppy plug to the 15-pin SATA header without reversing the cable?

Align the keyed 4-pin floppy connector with the device socket, then insert the 15-pin SATA male end into the power supply header; the polarised housings prevent backwards insertion.

Will the 8-inch cable length require replacement if I move the drive to a larger case?

The fixed 8-inch length suits compact builds; a longer cable would be needed only if the power supply header sits farther than 8 inches from the drive bay.

At what point does the thin gauge wire become the limiting factor under continuous load?

The small-gauge conductors in the 8-inch run will reach their current-carrying limit before the 15-pin SATA connector rating, so sustained high draw may cause voltage drop.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.