We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular PCB hub with eight 3-pin/4-pin fan headers, SATA power input, 7/12 V toggle switch, adhesive back, 53 x 48 mm

Vszerda

Vszerda 8-way SATA fan hub with 7/12 V switch

SKU CH-83GX-J22RR

Connects up to eight 3-pin or 4-pin fans to one SATA 15-pin power connector with a three-position 12 V, 7 V, or off switch and adhesive backing for chassis mounting

  • Controls up to eight fans from one SATA connector
  • Manual switch selects 12 V high, 7 V low or off
  • Self-adhesive back mounts hub inside chassis
  • Compact 53 × 48 mm PCB fits tight spaces
  • Works with both 3-pin and 4-pin fans

Fan hub for multi-fan builds

The Vszerda hub expands a single SATA 15-pin power connector into eight ports that accept both 3-pin and 4-pin case fans. It is intended for enthusiasts who need to run several cooling fans from one power source without occupying motherboard headers. Builders who require PWM speed curves tied to motherboard sensors will not find that functionality here.

Manual three-level speed control

A physical switch on the PCB lets the user select high speed at 12 V, low speed at 7 V, or off to stop the fans completely. This gives direct, hardware-level control over fan noise and airflow without software or BIOS configuration. The adhesive backing allows the 53 x 48 mm board to be secured inside the chassis for tidy cable routing.

SATA-powered eight-port splitter

The hub draws all power from a standard SATA 15-pin cable connected to the power supply, delivering up to eight simultaneous fan connections. No motherboard fan header is used for power or signalling. Verify that your power supply has a free SATA connector before installation.

Highlights

  • Controls up to eight fans from one SATA connector
  • Manual switch selects 12 V high, 7 V low or off
  • Self-adhesive back mounts hub inside chassis
  • Compact 53 × 48 mm PCB fits tight spaces
  • Works with both 3-pin and 4-pin fans

Specifications

No published specifications for this item yet.

Questions about this item

Will the SATA power connector need to be replaced if I upgrade my power supply?

The hub draws power from a standard SATA 15-pin cable, so it will work with any modern power supply that includes SATA connectors.

How many fans can run at full 12 V before the SATA cable becomes the bottleneck?

All eight ports can deliver 12 V simultaneously; the practical limit is the current rating of the single SATA 15-pin supply lead.

Does the hub itself generate noticeable heat or noise when all eight fans are running continuously?

The passive PCB with adhesive backing produces no noise and negligible heat; only the attached fans create airflow sound.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.