We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 8-port SATA PCIe card with six blue 90-degree cables and heat sink

Vszerda

Vszerda 8 Port SATA 3.0 PCIe Card 6 Blue 90° Cables Heat Sink Low Profile Bracket

SKU CH-6MYH-K1XC2

Adds eight SATA 3.0 ports via a PCIe x1 slot using the Marvell 88SE9215 chip and includes six blue 90° cables

  • Color6*Blue 90 °Cable
  • Conductorcopper
  • SATA 3.0 at 6.0 Gbps for fast storage
  • Marvell 88SE9215 chip with heat sink for reliable operation
  • PCIe x1 fits x2 x4 x8 x16 slots for broad compatibility
  • Six blue 90° cables included for tidy builds
  • Boots as system disk in AHCI mode for OS drives

Eight-port SATA expansion card

The Vszerda adapter adds eight SATA 3.0 ports through a single PCI-Express x1 slot using a Marvell 88SE9215 controller. It delivers 6.0 Gbps, 3.0 Gbps and 1.5 Gbps link speeds with full backward compatibility. The board includes a heat sink and ships with six blue 90-degree cables for internal drive connections.

Suited for storage upgrades on legacy platforms

Builders running Windows 10, 8, 7, Vista, XP, 2003, 2008 or Linux can add multiple hard drives without replacing the motherboard. The card works in x1, x2, x4, x8 or x16 slots and supports AHCI 1.0, IDE mode and NCQ. It is not for systems that lack a free PCI-Express slot or for users who need more than six simultaneous drive connections.

Fits standard desktop builds

The low-profile bracket allows installation in slim cases while the heat sink keeps the controller cool during sustained transfers. Six right-angle cables simplify routing in tight chassis. Hot-swap support lets you change drives without powering down, and the card can serve as a boot device when the OS is installed in AHCI mode.

Highlights

  • SATA 3.0 at 6.0 Gbps for fast storage
  • Marvell 88SE9215 chip with heat sink for reliable operation
  • PCIe x1 fits x2 x4 x8 x16 slots for broad compatibility
  • Six blue 90° cables included for tidy builds
  • Boots as system disk in AHCI mode for OS drives

Specifications

BrandVszerda
Color6*Blue 90 °Cable
Conductorcopper

Questions about this item

Do I need a free PCI Express x1 slot on my motherboard to install this 8-port SATA 3.0 card?

Yes, the card requires one available PCI Express x1 slot and is also compatible with x2, x4, x8 and x16 slots.

Will my existing SATA 1.5 Gbps and 3.0 Gbps hard drives work with the Marvell 88SE9215 chip on this adapter?

The card is backward compatible with SATA 1.5 Gbps and 3.0 Gbps drives, so older disks will function at their native speeds.

How can I verify the card is operating correctly after installing it in Windows 10?

Open Device Manager and confirm the Marvell 88SE9215 controller appears without errors, then check that each attached drive is listed in Disk Management.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.