We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 8-inch black cable with a white 15-pin SATA plug and a white 4-pin Molex plug

Vszerda

Vszerda 8 inch Molex 4-pin to SATA 15-pin internal power cable

SKU CH-M200-7F6X1

Converts a Molex 4-pin connector to a SATA 15-pin power plug for 2.5" or 3.5" drives using 18AWG copper wire over 8 inches

  • Powers SATA drives from legacy Molex supplies
  • 18 AWG copper conductors deliver reliable current
  • 8-inch length keeps cable routing tidy
  • Locking 15-pin SATA connector prevents accidental disconnects
  • Works with 2.5 and 3.5 inch SATA devices

Versatile SATA power adapter

This 8-inch cable converts a standard LP4 Molex connector into a SATA 15-pin power plug so you can run newer SATA hard drives or SSDs from an older power supply. The 18AWG copper conductors deliver reliable 12 V and 5 V power to both 2.5 and 3.5 inch drives. A locking latch on the SATA end keeps the connection secure inside desktop or server chassis.

Suited for legacy power supply upgrades

Builders who have free Molex leads but no native SATA power ports will find this adapter a direct fit for adding SATA storage. It is not intended for installations that need longer cable runs or right-angle connectors for tight routing. Systems that already provide native SATA power cables do not require this converter.

8-inch length with locking latch

The fixed 8-inch reach determines whether the cable spans the distance between your power supply Molex connector and the drive mounting point. Measure the internal routing path before ordering to confirm the length is sufficient for your chassis layout.

Highlights

  • Powers SATA drives from legacy Molex supplies
  • 18 AWG copper conductors deliver reliable current
  • 8-inch length keeps cable routing tidy
  • Locking 15-pin SATA connector prevents accidental disconnects
  • Works with 2.5 and 3.5 inch SATA devices

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the Vszerda adapter is delivering power correctly after connecting it?

The SATA drive should spin up and appear in BIOS or the operating system once the Molex end is seated in the power supply and the 15-pin latch clicks onto the drive.

What comes with the Vszerda cable and is anything else required for installation?

The package includes the single 8-inch 18AWG adapter with a locking 15-pin SATA connector and a 4-pin Molex plug; no extra parts are needed if your power supply has a free Molex socket.

Which version of this adapter should I choose for a 2.5-inch SSD versus a 3.5-inch hard drive?

The same cable works for both 2.5 and 3.5 inch SATA drives because it supplies the standard 15-pin power interface each drive expects.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.