Vszerda
Vszerda 6314H 24V 30W 172x172x51mm axial case fan
A 172 mm square axial fan delivering 545 m³/h airflow at 5000 min⁻¹ from a 24 V, 30 W ball-bearing motor
- High airflow of 545 m³/h cools large enclosures effectively
- 24 V DC input suits industrial power supplies directly
- Ball bearing design extends operating life under continuous use
- 30 W power draw balances performance with energy efficiency
- Compact 172 x 172 x 51 mm frame fits standard mounting points
24 V 30 W axial fan for industrial chassis
The Vszerda 6314H is a 172 mm square axial fan built for 24 V DC systems. It draws 1.25 A at 30 W and spins at 5000 min-1 to move up to 545 m3/h of air. Ball-bearing construction supports continuous duty in server enclosures, telecom racks or custom workstations that require high static pressure.
Replaces noisy sleeve-bearing 24 V fans
This unit suits technicians swapping out worn 172 mm fans that have developed bearing rattle or reduced airflow. The step up is justified when the original fan cannot sustain 545 m3/h at 51 mm depth or when a CE-marked ball-bearing replacement is specified by the equipment manufacturer.
Delivers 545 m3/h in a 51 mm frame
At full speed the fan clears dense heatsink arrays and restrictive filter panels common in 1U and 2U appliances. Headroom drops when inlet temperature exceeds design limits or when system impedance rises above the fan’s pressure curve, so additional airflow paths may be needed for heavily loaded multi-GPU compute nodes.
Highlights
- High airflow of 545 m³/h cools large enclosures effectively
- 24 V DC input suits industrial power supplies directly
- Ball bearing design extends operating life under continuous use
- 30 W power draw balances performance with energy efficiency
- Compact 172 x 172 x 51 mm frame fits standard mounting points
Specifications
No published specifications for this item yet.
Questions about this item
What mounting hole spacing does the 172 mm square frame require?
The fan frame measures 172 by 172 mm with standard corner holes; match your case or radiator to that 172 mm pitch and allow 51 mm depth clearance.
How do I connect the two-wire 24 V lead without damaging the fan?
Supply 24 V DC directly to the red and black wires; the fan draws 1.25 A at 30 W, so use a header or supply rated for at least that current and observe polarity.
When should I plan to replace the ball-bearing assembly?
Ball bearings typically run for tens of thousands of hours at 5000 min⁻¹; schedule replacement once airflow drops below 545 m³/h or noise increases noticeably.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114821BTC
In stock
