We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 90-degree 12VHPWR GPU power adapter with aluminum mech-armor shield

Vszerda

Vszerda 600W 12VHPWR 90° Adapter RVS Type Red

SKU CH-WTQ9-V5577

A 90-degree 12VHPWR adapter delivers 600W to RTX 3090Ti, 4070Ti, 4080 and 4090 cards with a reinforced 4-layer PCB and aluminum vented housing

  • Angled 90° design prevents cable bending and ensures full terminal contact
  • 600W capacity supported by 2oz copper 4-layer PCB for heat dissipation
  • 12V-2x6 connector compatible with 12VHPWR for safe current delivery
  • Aluminium mech-armor casing with thermal venting channels aids cooling
  • Slim profile fits RTX 3090Ti, 4070Ti, 4080 and 4090 configurations

Angled 12VHPWR Adapter

This 90-degree adapter connects a 12V-2x6 or 12VHPWR cable to compatible graphics cards without bending the wires. It is built for builders who need a clean right-angle fit in tight chassis spaces. The RVS-type design uses a reinforced PCB rated for 600W delivery.

Sustained Load Behaviour

The four-layer board with 2oz copper spreads heat during continuous 600W operation. Integrated thermal venting channels in the aluminium casing assist passive cooling. The connector specification ensures full terminal contact so current stays stable under prolonged gaming or compute workloads.

Pre-Installation Checks

Verify your graphics card uses a 12VHPWR or 12V-2x6 input and that the power supply cable matches. The adapter is not recommended for RTX 5090 due to extreme power spikes. Ensure the 16-pin plug seats with zero gap before powering on.

Highlights

  • Angled 90° design prevents cable bending and ensures full terminal contact
  • 600W capacity supported by 2oz copper 4-layer PCB for heat dissipation
  • 12V-2x6 connector compatible with 12VHPWR for safe current delivery
  • Aluminium mech-armor casing with thermal venting channels aids cooling
  • Slim profile fits RTX 3090Ti, 4070Ti, 4080 and 4090 configurations

Specifications

No published specifications for this item yet.

Questions about this item

Does the 90-degree right-angle design prevent heat buildup during all-day loads?

The angled connector removes tight wire bending so every terminal makes full contact, and the aluminium casing with venting channels helps dissipate heat from the 2 oz copper, 4-layer PCB rated for 600 W.

Which power supply cables must I already have to use this adapter?

You need a PSU that provides a native 12VHPWR or 12V-2x6 output; the adapter simply re-routes that existing connector at a 90-degree angle.

Will the RVS Type Red adapter fit my RTX 4080 without blocking adjacent slots?

Its slimmer profile is built for broader graphics-card clearance, and the 90-degree orientation keeps the cable close to the card so neighbouring slots stay accessible.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.