We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black 18 AWG cables with 6-pin to 6+2-pin PCIe connectors, 100 cm long

Vszerda

Vszerda 6-pin to 6+2-pin PCIe power cable 18AWG 100cm 6-pack

SKU CH-53FK-1KHFN

Six cables convert a 6-pin server output to a 6+2-pin graphics-card connector using 18AWG tinned-copper wire

  • Six cables supply multiple GPUs from one pack
  • 18 AWG tinned copper handles high GPU current
  • 6-pin to 6+2-pin fits both 6-pin and 8-pin cards
  • 100 cm length reaches full-tower layouts
  • UL 1007 rated wire meets safety standards

Vszerda 6-pin to 6+2-pin PCIe cable 6-pack

This pack contains six internal power cables that convert a server-style 6-pin output into a standard 6+2-pin PCIe graphics connector. They are designed for builders using server 6-pin converter boards to power graphics cards or mining modules. Each cable uses 18AWG tinned copper wire rated to UL 1007. The 100 cm length suits full-tower chassis and open mining frames.

18AWG tinned copper conductor on UL 1007 wire

The single specification that determines compatibility is the 18AWG tinned copper conductor built to UL 1007. This gauge and insulation rating define the safe current capacity for the 6-pin to 6+2-pin conversion. Buyers who need a heavier gauge for sustained high-wattage loads or a different insulation standard cannot use these cables.

Push-on connectors with 100 cm reach

Installation is a simple push of the 6-pin end into the server converter board and the 6+2-pin end into the graphics card or module. The 100 cm length provides slack for routing behind motherboard trays. What usually goes wrong is reversing the 6+2-pin orientation or seating the 6-pin side loosely on the converter board, which can cause intermittent power.

Highlights

  • Six cables supply multiple GPUs from one pack
  • 18 AWG tinned copper handles high GPU current
  • 6-pin to 6+2-pin fits both 6-pin and 8-pin cards
  • 100 cm length reaches full-tower layouts
  • UL 1007 rated wire meets safety standards

Specifications

No published specifications for this item yet.

Questions about this item

Will an 18 AWG cable carry enough current for a modern graphics card?

The 18 AWG tinned copper conductors are rated for the typical current draw of a 6-pin or 8-pin PCIe connector, so they handle standard GPU power requirements without voltage drop.

Does the 6+2 pin end work with both 6-pin and 8-pin graphics card sockets?

Yes, the 6+2 pin connector splits so you can plug it into either a 6-pin or an 8-pin PCIe power socket on the graphics card.

Will the 100 cm length reach from a bottom-mounted PSU to a top-slot GPU in a full-tower case?

At 100 cm the cable is long enough to route behind the motherboard tray and reach the top PCIe slot in most full-tower builds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.