We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with a 6-pin male plug splitting into three 15-pin SATA female connectors

Vszerda

Vszerda 6-Pin to 3× SATA 15-Pin Adapter Cable 20in for Corsair PSUs

SKU CH-PY8W-181MJ

Connects a Corsair modular PSU to three SATA drives with a 20-inch main cable and 6-inch branches, 18 AWG wire

  • Connects three SATA drives from one Corsair PSU 6-pin port
  • 20-inch main cable with two 6-inch branches for flexible routing
  • 18 AWG tin-coated copper wire delivers reliable power to drives
  • Compatible with Corsair RM, RMX, RMi, HX, HXi, CX, CX-M, CS, SF, TX, AX, AXi series
  • Not for use with AX1200, AX750 or AX850 models

Corsair-Specific 6-Pin to Triple SATA Adapter

This Vszerda adapter cable connects a single 6-pin male port on compatible Corsair modular power supplies to three 15-pin SATA female connectors. It is designed exclusively for the listed Corsair RM, RMX, RMi, HX, HXi, CX, CX-M, CS, SF, TX, AX and AXi series units. The cable is not compatible with AX1200, AX750 or AX850 models. Using it with unsupported power supplies can damage components.

Builders with Supported Corsair PSUs Needing Extra

The cable suits users who own a compatible Corsair modular PSU and need to power up to two SATA devices such as hard drives or riser cards. It is not for owners of non-Corsair power supplies, nor for the excluded AX1200, AX750 and AX850 units. Builders requiring more than two riser cards should look elsewhere, as connecting three risers will damage the cable. Anyone uncertain about their PSU model should verify compatibility before use.

20-Inch Main Lead with Two 6-Inch Branches

The main cable runs 20 inches (50 cm) from the PSU, then splits into two secondary branches of 6 inches (15 cm) each, with 6 inches (15 cm) between the SATA connectors. Rated at 1007-18AWG, it comfortably handles two riser cards or SATA drives. Connecting a third riser card exceeds the design limit and will cause the cable to fail or burn at any time. The three SATA ports provide headroom for multiple drives when risers are not used.

Highlights

  • Connects three SATA drives from one Corsair PSU 6-pin port
  • 20-inch main cable with two 6-inch branches for flexible routing
  • 18 AWG tin-coated copper wire delivers reliable power to drives
  • Compatible with Corsair RM, RMX, RMi, HX, HXi, CX, CX-M, CS, SF, TX, AX, AXi series
  • Not for use with AX1200, AX750 or AX850 models

Specifications

BrandVszerda

Questions about this item

Which Corsair power-supply series must I already own for this 6-pin to triple SATA adapter to work?

It fits Corsair RM, RMX, RMi, HX, HXi, CX, CX-M, CS, SF, TX, AX and AXi series units, but will not work with AX1200, AX750 or AX850 models.

Can I keep using my existing SATA hard drives or riser cards with this cable?

Yes — the three 15-pin SATA female connectors plug directly into standard SATA drives or riser cards, spaced 6 inches apart on 18 AWG wire.

How do I verify the cable is delivering power correctly after I connect it?

Each attached drive should spin up and appear in the BIOS or operating system; the 1007-18AWG conductors are rated for up to two riser cards only.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.