We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black 40 cm PCIe cables with 6-pin to 6+2-pin connectors

Vszerda

Vszerda 6× PCIe 6-pin to 6+2-pin internal power cable 40 cm

SKU CH-927A-PW6V3

Six 18 AWG cables convert a server 6-pin output to a graphics 6+2-pin connector at 40 cm length

  • Six cables supply multiple GPUs from a single PSU
  • 18 AWG tinned-copper conductors handle high current loads
  • 6-pin to 6+2-pin design fits both 6-pin and 8-pin GPU sockets
  • 40 cm length keeps server chassis routing tidy
  • UL 1007 rated wire meets standard safety requirements

Vszerda 6× PCIe 6-pin to 6+2-pin cable kit

This kit provides six internal power cables that adapt a server 6-pin converter board output to a standard 6+2-pin PCIe graphics connector. Each cable uses 18 AWG tinned copper conductors to 1007 specification and measures 40 cm in length. The set is intended for builders powering graphics cards or mining modules from a server-style 6-pin source.

Suited for server-to-GPU power conversion

These cables suit technicians who need to connect 8-pin graphics cards or compatible power modules to a server 6-pin converter board. They are not for users with standard ATX power supplies that already provide native 6+2-pin PCIe leads. Buyers requiring longer reach than 40 cm or a different wire gauge should look elsewhere.

18 AWG 1007 tinned copper conductors

The single specification that decides fit is the 18 AWG 1007 tinned copper wire, which determines current capacity and flexibility for the 40 cm run. Verify that your server converter board and graphics hardware accept this gauge before installation.

Highlights

  • Six cables supply multiple GPUs from a single PSU
  • 18 AWG tinned-copper conductors handle high current loads
  • 6-pin to 6+2-pin design fits both 6-pin and 8-pin GPU sockets
  • 40 cm length keeps server chassis routing tidy
  • UL 1007 rated wire meets standard safety requirements

Specifications

No published specifications for this item yet.

Questions about this item

What is the wire gauge and model used on these PCIe 6-pin to 6+2-pin cables?

The cables use 18 AWG conductors in UL 1007 wire with tinned copper strands.

How long is each cable and will it reach from a server 6-pin converter board to a graphics card in a standard chassis?

Each cable measures 40 cm, a length suited for typical server-to-GPU routing inside a 4U or tower case.

Do I plug the 6-pin end into the server converter board and the 6+2-pin end into the graphics card, or the other way round?

Connect the 6-pin male to the server converter board and the 6+2-pin male to the graphics card; reversing them will not deliver power correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.