We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black 27 cm PWM fan splitter cables with braided sleeving

Vszerda

Vszerda 5PCS 4Pin PWM Fan Splitter Cable 1 to 3 27cm

SKU CH-SZDT-WV8WD

Five 27 cm cables split one motherboard PWM header into three fan connectors using 24 AWG tinned-copper wire

  • Connect three PWM fans to one motherboard header
  • 27 cm length suits most case routing needs
  • Black snakeskin sleeve keeps internal wiring tidy
  • Tinned copper 24 AWG conductors carry PWM signals reliably
  • Two connectors omit sense wire to prevent signal collision

5-Pack 4-Pin PWM Fan Splitter Cables

This set contains five cables that each split one motherboard 4-pin PWM header into three fan connections. Builders running multi-fan radiators or case arrays can drive two or three PWM fans from a single socket. The 27 cm length suits typical mid-tower routing. Buyers who need more than three fans per header or who require individual speed reporting for every fan should look elsewhere.

Check header type and speed-signal needs

Verify that the motherboard header is a standard 4-pin PWM type; 3-pin fans will run but only two of the three branches carry the tachometer wire back to the board. Ensure the combined current draw of the attached fans stays within the header rating. The 1007 24 AWG tinned-copper conductors and black snakeskin sleeve are designed for internal chassis use only.

Snakeskin sleeve aids cable management

The braided sleeve bundles the three leads together, reducing clutter and improving airflow paths inside the case. Because two branches omit the speed-measurement wire, the motherboard receives a single RPM signal rather than three separate readings. No software or additional adapters are included in the pack.

Highlights

  • Connect three PWM fans to one motherboard header
  • 27 cm length suits most case routing needs
  • Black snakeskin sleeve keeps internal wiring tidy
  • Tinned copper 24 AWG conductors carry PWM signals reliably
  • Two connectors omit sense wire to prevent signal collision

Specifications

No published specifications for this item yet.

Questions about this item

What does the pack contain and is anything extra needed?

The pack contains five 27 cm splitter cables; each splits one motherboard 4-pin PWM header into three 4-pin fan connectors so you can run up to fifteen fans from five headers with no extra parts required.

Why are there five identical cables instead of different versions?

Every cable is the same 27 cm, 24 AWG tinned-copper design with black snakeskin sleeving; buying the five-pack simply gives you multiple identical splitters for several headers or builds.

How does the speed-signal wiring work when three fans share one header?

Only one fan per splitter reports its RPM signal back to the motherboard; the other two connectors omit the sense wire to prevent signal collisions while all three fans still receive the same PWM control signal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.