We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five yellow and black 100cm PCIe cables with 6-pin to 8-pin connectors

Vszerda

Vszerda 5pcs 100cm 6pin to 8Pin (6+2Pin) PCI-E Cable 18AWG Mining internal power cable

SKU CH-4CE4-1ZMHT

Set of five 100 cm PCIe cables that adapt a 6-pin PSU connector to an 8-pin (6+2) graphics-card plug using 18 AWG wire

  • Five cables let you power multiple GPUs from one PSU
  • 18 AWG conductors handle high mining currents safely
  • 100 cm length gives flexible routing in large cases
  • 6-pin to 8-pin (6+2) adapters fit varied graphics cards
  • Yellow and black sleeves add clear cable identification

Five-piece PCI-E power adapter kit

This set contains five 6-pin to 8-pin (6+2-pin) cables intended to connect graphics cards to a power supply. Each cable measures approximately 100 cm or 40 inches in length. The yellow and black sleeving uses 18 AWG conductors wrapped in plastic and metal connectors. The kit is designed for mining rigs and other multi-GPU configurations requiring supplemental power.

Thermals and power delivery

The 18 AWG wire gauge supports the current draw typical of PCI-E auxiliary connectors without excessive voltage drop. Connectors are moulded from plastic with metal pins to maintain a secure fit under continuous load. No active cooling or fan is present, so the cables rely on case airflow to remain at safe temperatures during sustained mining or compute workloads.

Six-pin to eight-pin breakout compatibility

These adapters convert a single 6-pin PSU output into an 8-pin (6+2) graphics-card input, reducing the load on the motherboard slot. They suit builders who need to power cards that require an 8-pin connector but only have 6-pin leads available. Buyers whose power supplies already provide native 8-pin cables do not need this adapter.

Highlights

  • Five cables let you power multiple GPUs from one PSU
  • 18 AWG conductors handle high mining currents safely
  • 100 cm length gives flexible routing in large cases
  • 6-pin to 8-pin (6+2) adapters fit varied graphics cards
  • Yellow and black sleeves add clear cable identification

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 6-pin to 8-pin PCIe cable and what step is often missed?

Connect the 6-pin end to the power supply and the 8-pin (6+2) end to the graphics card, ensuring the 2-pin segment is fully seated if the card requires an 8-pin connector; the common mistake is leaving the extra 2 pins unplugged on an 8-pin socket.

What maintenance or replacement will the 18AWG cable need over time?

Inspect the yellow and black connectors and 100cm cable run periodically for discolouration, melted plastic or loose pins; replace any cable showing heat damage or intermittent contact to avoid power delivery issues.

What limit appears first when the cable runs continuously at mining loads?

The 18AWG conductor cross-section sets the current ceiling; sustained high draw will hit the wire’s ampacity limit before the 6-pin or 8-pin connectors reach their rated capacity, so monitor connector temperatures.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.