We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50 cm cable with two USB 2.0 A ports and a 10 pin header

Vszerda

Vszerda 50cm Dual USB 2.0 A Female Panel Mount 10P 0.1" Header Motherboard Cable

SKU CH-P2G5-5288W

Adds two USB 2.0 Type-A ports to a front panel or chassis using a 10-pin 0.1-inch motherboard header and a 50 cm shielded cable

  • Adds two front USB 2.0 ports with 50cm cable
  • Mounts securely via screw holes on 10-pin 0.1" header
  • 28AWG copper conductors with 96-strand braid reduce signal loss
  • HDPE insulation and PVC jacket give flexible, durable build
  • Hot-pluggable design works on desktop and notebook systems

Dual USB 2.0 panel-mount cable

This 50 cm cable adds two USB 2.0 Type-A ports to a chassis or front panel. It connects to a standard 10-pin 0.1 inch motherboard header using a DuPont connector with screw holes for secure mounting. The assembly is aimed at system builders and modders who need extra external USB connections without occupying rear I/O slots.

Check header pinout and panel cut-out

Verify that the motherboard provides a 10-pin USB 2.0 header with the standard pin arrangement before ordering. Ensure the front-panel or chassis opening matches the panel-mount dimensions of the USB baffles. The cable length is fixed at 0.5 m, so measure the internal routing distance from header to panel location to confirm reach.

Shielded 28 AWG conductors with braid

Each conductor uses 28 AWG bare copper wrapped in aluminum foil and a 96-strand aluminum-magnesium braid to reduce signal attenuation. The jacket combines an inner HDPE layer with a black PVC outer sheath that remains flexible and resists pulling stress. Screw-hole ears on the connector and baffle allow firm mechanical fixation, preventing accidental disconnection during daily use.

Highlights

  • Adds two front USB 2.0 ports with 50cm cable
  • Mounts securely via screw holes on 10-pin 0.1" header
  • 28AWG copper conductors with 96-strand braid reduce signal loss
  • HDPE insulation and PVC jacket give flexible, durable build
  • Hot-pluggable design works on desktop and notebook systems

Specifications

No published specifications for this item yet.

Questions about this item

Does the cable include the mounting hardware or do I need to buy screws separately?

The panel-mount USB 2.0 Type-A connectors have screw holes for fixing; screws are not included.

Should I choose the 50 cm length or order a custom length for my chassis?

The standard cable is 50 cm (0.5 m); other lengths can be customised on request.

What does the 28AWG conductor with shielding mean for real-world USB 2.0 transfer speeds?

The 28AWG bare copper conductors, aluminum foil wrap and 96-strand braid reduce attenuation so the link runs at full USB 2.0 high-speed rates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.