Vszerda
Vszerda 50CM 22 Pin SATA III 6Gbps Data Power to SATA 7pin Molex 4pin Combo Cable Red
A 50 cm combo cable delivers SATA 3.0 6Gbps data and Molex 4-pin power to a 22-pin SATA drive, supporting both 2.5 and 3.5 inch units
- Combines 22-pin data and power in one 50 cm cable
- Supports SATA 3.0 6Gbps bandwidth for fast transfers
- Draws 12V and 5V from a Molex 4-pin connector
- Works with both 2.5" and 3.5" SATA hard drives
- Thin profile reduces clutter and improves case airflow
22-pin SATA data and power cable
This 50 cm combo cable connects a 22-pin SATA drive to a standard 7-pin data port and a Molex 4-pin power connector. It delivers 12 V and 5 V power, supporting both 3.5" and 2.5" SATA hard drives. The thin cable design helps reduce clutter and improve airflow inside the case. Rated for SATA 3.0 6 Gbps bandwidth.
Builders adding SATA drives to Molex power supplies
Suits anyone powering a SATA drive from an existing LP4 connection without upgrading the power supply. Not for builders who need a second cable for multiple drives. Not for systems that require a different power connector or longer reach than 50 cm. Not for drives needing a pure SATA power source.
50 cm length and SATA 3.0 speed
The 50 cm length decides fit in compact or full-size chassis. The SATA 3.0 6 Gbps rating decides maximum data throughput for the connected drive. The 22-pin to 7-pin plus Molex 4-pin layout decides compatibility with your drive and power supply.
Highlights
- Combines 22-pin data and power in one 50 cm cable
- Supports SATA 3.0 6Gbps bandwidth for fast transfers
- Draws 12V and 5V from a Molex 4-pin connector
- Works with both 2.5" and 3.5" SATA hard drives
- Thin profile reduces clutter and improves case airflow
Specifications
No published specifications for this item yet.
Questions about this item
What does the 6 Gbps rating mean when the cable is installed in a system?
The 6 Gbps rating matches SATA 3.0 bandwidth, so the link will run at full speed provided the drive and controller also support SATA 3.0.
Which SATA standard does the 7-pin data connector follow, and what throughput limit does it impose?
The 7-pin connector follows SATA 3.0, capping the data path at 6 Gbps when paired with a SATA 3.0 drive and host port.
What clearance and connectors are needed to fit the 22-pin end onto a drive?
The 22-pin plug combines data and power in one narrow block that fits both 2.5 and 3.5 inch SATA drives, requiring only the standard drive connector spacing.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



