We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 50 cm SATA 22-pin combo cable with 7-pin data and Molex 4-pin power connectors

Vszerda

Vszerda 50 cm 22-pin SATA III 6Gbps data & power to SATA 7-pin & Molex 4-pin combo cable, red

SKU CH-YFG5-X5J83

Combines SATA data and Molex power into a single 50 cm cable for 2.5 and 3.5 inch drives

  • Powers SATA drives from a Molex 4-pin connector avoiding a PSU upgrade
  • 50 cm SATA III 6 Gbps data link supports 3.0 speeds
  • Thin cable design reduces clutter and improves case airflow
  • Supplies 12 V and 5 V for both 3.5" and 2.5" SATA drives
  • 22-pin combo carries data and power in a single cable

Vszerda 50 cm SATA III 6Gbps combo cable

This cable merges a 22-pin SATA 3.0 connector into a 7-pin data plug and a Molex 4-pin power tap, delivering 6Gbps bandwidth for 2.5 and 3.5 inch SATA drives. It lets builders run both signals from a single LP4 supply rail without upgrading the PSU, saving a connector slot in tight bays.

Builders upgrading older PSUs to SATA drives

Suits anyone adding a 2.5 or 3.5 inch SATA hard drive to a power supply that only offers Molex 4-pin outputs, while keeping cable bulk low for better airflow. It will not help users whose drives require a native SATA power connector, who need a longer run than 50 cm, or who must feed multiple drives from one lead.

22-pin SATA to 7-pin data plus Molex 4-pin power

The single deciding spec is the 22-pin SATA III plug that splits into separate 7-pin data and Molex 4-pin power ends, fixed at 50 cm. If your drive bay needs that exact split and reach, the cable fits; if the layout demands a different split, length or connector gender, another part is required.

Highlights

  • Powers SATA drives from a Molex 4-pin connector avoiding a PSU upgrade
  • 50 cm SATA III 6 Gbps data link supports 3.0 speeds
  • Thin cable design reduces clutter and improves case airflow
  • Supplies 12 V and 5 V for both 3.5" and 2.5" SATA drives
  • 22-pin combo carries data and power in a single cable

Specifications

No published specifications for this item yet.

Questions about this item

Which power connector must my PSU provide for the 22-pin SATA end to work?

Your power supply needs a free Molex 4-pin (LP4) connector to deliver 12V and 5V to the cable.

Will the 6Gbps SATA 3.0 data link still run at full speed when I attach a 3.5-inch mechanical drive?

Yes, the cable supports SATA 3.0 6Gbps bandwidth with both 3.5-inch and 2.5-inch SATA drives.

How can I confirm the 50 cm cable is delivering stable power and data after installation?

The drive should appear in BIOS/UEFI at SATA 6Gbps, spin up without clicking, and show no SMART power-loss errors during use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.