We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved modular PSU cable with 5-pin connector branching to three SATA power plugs, 88 cm long

Vszerda

Vszerda 5-Pin to 3×SATA Modular PSU Cable 88 cm

SKU CH-MBGC-MBDNC

Connects three SATA drives to a 5-pin modular PSU port using 18 AWG copper wire, 88 cm long, compatible with OCZ ZT and Great Wall units up to 1560 W

  • Connect three SATA drives from one 5-pin modular port
  • 18 AWG pure copper wire delivers reliable power
  • 88 cm length reaches drives in full-tower cases
  • Black sleeved finish keeps cable routing tidy
  • Compatible with OCZ ZT 650W 750W 850W 1000W 1250W and Great Wall 750W 1000W 1250W 1560W PSUs

Modular PSU Cable for OCZ ZT and Great Wall

This black-sleeved adapter connects a 5-pin modular port on compatible OCZ ZT or Great Wall power supplies to three SATA power connectors. It uses 18 AWG pure copper wire and spans 88 cm in total length. The cable is designed for internal power distribution in desktop builds.

Suits owners of listed OCZ ZT

Builders with OCZ ZT models rated 650 W, 750 W, 850 W, 1000 W or 1250 W, or Great Wall units rated 750 W, 1000 W, 1250 W or 1560 W can use this cable to power up to three SATA devices. Owners of other PSU brands or non-modular units cannot connect the 5-pin end and should look elsewhere.

5-pin modular connector compatibility decides fit

The cable only works when the power supply provides a matching 5-pin modular output wired for the OCZ ZT or Great Wall pin-out. If the PSU lacks that specific port, the adapter will not attach and cannot supply power to the SATA connectors.

Highlights

  • Connect three SATA drives from one 5-pin modular port
  • 18 AWG pure copper wire delivers reliable power
  • 88 cm length reaches drives in full-tower cases
  • Black sleeved finish keeps cable routing tidy
  • Compatible with OCZ ZT 650W 750W 850W 1000W 1250W and Great Wall 750W 1000W 1250W 1560W PSUs

Specifications

No published specifications for this item yet.

Questions about this item

What PSU connector does the 5-pin end of this cable plug into?

The 5-pin modular connector is designed for OCZ ZT series units rated 650W, 750W, 850W, 1000W and 1250W and Great Wall units rated 750W, 1000W, 1250W and 1560W.

How do I install the cable without damaging the SATA power ports?

Align each 15-pin SATA connector with the drive port, press straight in until the latch clicks, and route the 18 AWG sleeved wires so they are not sharply bent near the plugs.

When should I replace this 88 cm sleeved cable?

Replace it if the black sleeving frays, the 18 AWG copper conductors become exposed, or any SATA connector feels loose or shows melted plastic.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.