We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black-sleeved 4-pin fan splitter cables, each splitting one female connector to three male connectors, 260 mm long

Vszerda

Vszerda 5× Fan Splitter Cable 4-Pin 1-to-3 PWM 260 mm

SKU CH-KT6X-CP1GV

Five black-sleeved 4-pin PWM splitters each connect three fans to one header at 260 mm length

  • Connect up to three fans from one header using 1-to-3 PWM splitter
  • 260 mm length gives flexible routing inside any ATX case
  • Black sleeved cables reduce clutter and improve airflow aesthetics
  • Works with both 4-pin and 3-pin fans for broad compatibility
  • Five cables in one pack cover multiple fan headers at once

5× PWM fan splitter cables

This pack supplies five black-sleeved splitter cables that turn one 4-pin motherboard header into three fan connections. Each cable measures 260 mm (10.24 in) and is designed for standard ATX case builds.

Check header type and total current

Verify that your motherboard provides a 4-pin PWM header; the splitters also accept 3-pin fans but will run them at fixed voltage. Ensure the combined current draw of the three attached fans does not exceed the header’s rated limit.

Replaces single short fan leads

These cables replace the short, fixed-length leads that ship with most case fans, letting you route three fans from one header without daisy-chaining. The upgrade is worth it when you need cleaner cable management or extra reach in larger cases.

Highlights

  • Connect up to three fans from one header using 1-to-3 PWM splitter
  • 260 mm length gives flexible routing inside any ATX case
  • Black sleeved cables reduce clutter and improve airflow aesthetics
  • Works with both 4-pin and 3-pin fans for broad compatibility
  • Five cables in one pack cover multiple fan headers at once

Specifications

No published specifications for this item yet.

Questions about this item

What cables and connectors are included in the box, and do I need to buy anything else to use them?

The pack contains five black-sleeved splitter cables, each with one 4-pin female connector that splits to three 4-pin male connectors. No extra cables or adapters are required for standard 3-pin or 4-pin fans.

There are five identical cables in the pack; how should I decide which ones to use in my build?

All five cables are the same 260 mm length and wiring, so use as many as you need — up to three fans per cable — and keep the rest as spares or for future upgrades.

The headline says 1-to-3 PWM; what does that actually deliver when the cable is connected to a motherboard header?

The single 4-pin female end plugs into one motherboard PWM header and provides three 4-pin male outputs, letting the board control speed for up to three fans from that one header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.