We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 5-channel fan and pump controller with PCI bracket, black plastic housing and silver knobs

Vszerda

Vszerda 5-Channel 12V 3A Fan & Pump Controller with PCI Bracket

SKU CH-J9HD-MW7Q0

Five-channel controller adjusts 12 V fans and DDC/D5 pumps from 0 % to 100 % via individual knobs, each channel handling up to 3 A or 36 W, and mounts on a standard PCI bracket

  • Controls five fans or pumps individually
  • Knob adjusts each channel from zero to full speed
  • 36 watts per channel at 12 volts
  • Any channel can be switched off completely
  • Mounts in a standard PCI slot bracket

Five-channel 12V fan and pump controller

This controller manages up to five 3-pin or 4-pin fans or water pumps from a single Molex power connector. It fits into a standard PCI slot bracket for secure rear mounting. Builders who want independent speed control for multiple cooling devices will find it straightforward to install.

3 A per channel with individual shutdown

Each channel delivers up to 3 A and 36 W, enough for high-power DDC or D5 pumps and server-grade fans. A rotary knob adjusts speed from zero to 100 percent per channel, and any channel can be turned off completely. Note that 4-pin fans run in voltage-control mode only, not PWM.

PCI bracket mounting and Molex power

The included bracket and screw let the unit occupy one rear expansion slot, keeping cables inside the case. Power comes from a Molex 4-pin female connector, so a spare drive power lead is required. Pump users should budget for a Molex-to-fan adapter cable, which is not supplied.

Highlights

  • Controls five fans or pumps individually
  • Knob adjusts each channel from zero to full speed
  • 36 watts per channel at 12 volts
  • Any channel can be switched off completely
  • Mounts in a standard PCI slot bracket

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12V 3A controller handle my existing D5 pump and 4-pin PWM fans together?

Each of the five channels delivers up to 3A at 12V, so a D5 pump on one channel and 4-pin fans on the others run simultaneously within the 36W per-channel limit.

How do I verify each channel is regulating speed correctly after install?

Turn the individual knob from 0% to 100% and observe the fan or pump RPM change; each channel can also be switched off independently to confirm isolation.

Does the package include the Molex-to-fan adapter cables for my DDC pump?

The box contains the controller, a standard PCI slot rear bracket and mounting screw; Molex-to-3-pin or 4-pin adapter cables are not included and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.