We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda 4K 60Hz HDMI 2.0 Switch 4 in 1 Out Audio Extractor ARC

SKU CH-0VCE-0RNWV

A 4-in-1 HDMI 2.0 switch routes four sources to one 4K 60 Hz display and extracts audio via HDMI 7.1, optical 5.1 or 3.5 mm 2.0 outputs with ARC support

  • 4 HDMI inputs to one display with 4K 60 Hz video
  • Audio extracted to HDMI 7.1 Atmos, optical 5.1 and 3.5 mm stereo
  • ARC support returns TV audio to your sound system
  • Remote and auto-switching select the active source instantly
  • HDCP 2.2 and 18.5 Gbps bandwidth handle HDR 10 and 36-bit colour

Vszerda 4K HDMI 2.0 Switch

This 4-in-1-out HDMI 2.0 switch routes four HDMI sources to a single display at up to 4K 60 Hz with HDR 10 and HDCP 2.2 support. It suits home-theatre owners or gamers who need to connect multiple consoles, streamers or players to one TV or projector. The unit handles 18.5 Gbps bandwidth and 36-bit Deep Colour for full RGB 8:8:8 fidelity. It is not a 1-in-4-out splitter and cannot drive multiple screens simultaneously.

Audio extraction and ARC support

The switch extracts audio from the incoming HDMI stream to three independent outputs: HDMI audio pass-through up to 7.1-channel Dolby Atmos and DTS:X, optical Toslink up to 5.1-channel Dolby Digital or DTS, and a 3.5 mm jack for stereo PCM 2.0. Four selectable audio modes — 7.1 CH, 5.1 CH, 2.0 CH and pass-through — let you match the signal to your soundbar, AV receiver or headphones. ARC on the HDMI output returns TV audio to an external system without extra cables.

Installation and common issues

Connect up to four HDMI sources and one display, then choose an audio output; the box auto-switches to the most recently inserted live signal and includes a remote for manual selection. Ensure all cables are HDMI 2.0 rated for 4K 60 Hz; older leads may fall back to 1080p. The optical port only carries 5.1 or stereo PCM, so 7.1 formats require the HDMI audio path. No driver or firmware updates are involved.

Highlights

  • 4 HDMI inputs to one display with 4K 60 Hz video
  • Audio extracted to HDMI 7.1 Atmos, optical 5.1 and 3.5 mm stereo
  • ARC support returns TV audio to your sound system
  • Remote and auto-switching select the active source instantly
  • HDCP 2.2 and 18.5 Gbps bandwidth handle HDR 10 and 36-bit colour

Specifications

No published specifications for this item yet.

Questions about this item

Does the 3.5 mm audio output need any maintenance or replacement over time?

The 3.5 mm port is a passive analogue connection with no moving parts or consumable components, so it does not require scheduled maintenance or replacement under normal use.

What is the first limit reached when the switch runs continuously at 4K 60 Hz with 18.5 Gbps bandwidth?

The 600 MHz pixel clock and 18.5 Gbps bandwidth ceiling are the hard limits; sustained 4K 60 Hz RGB 8:8:8 operation stays within them, so no lower bottleneck appears first.

How much heat or noise does the unit produce when powered all day?

The switch uses a fanless design and draws minimal power, so it runs silently and stays only slightly warm during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.