We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PCIe x1 controller card with four SATA ports and Marvell 88SE9215 chip

Vszerda

Vszerda 4 Port SATA 3.0 PCIe 3.0 X1 Controller Card Marvell 88SE9215

SKU CH-YR9F-B56SZ

Adds four SATA 3.0 ports at 6.0 Gbps via a PCIe 3.0 x1 slot using the Marvell 88SE9215 chip, supports boot drives and hot swap

  • Add four SATA 3.0 drives at 6.0 Gbps
  • Works with older SATA 1.5 and 3.0 Gbps drives
  • Marvell 88SE9215 chip for broad compatibility
  • Fits any PCIe x1, x4, x8 or x16 slot
  • Boot from SSD or HDD in AHCI mode

Add Four SATA 3.0 Ports

This Vszerda controller card adds four 6 Gbps SATA 3.0 connections through a single PCIe 3.0 x1 slot. The Marvell 88SE9215 chip provides backward compatibility with 1.5 and 3 Gbps drives. It supports AHCI and IDE modes for broad operating system support.

Suits Builders Needing Extra Internal Drives

Ideal for adding multiple SSDs or HDDs to a desktop with a free PCIe x1, x4, x8 or x16 slot. Hot-swap capability simplifies drive changes. Not suited for systems that lack a PCI Express slot or for users requiring hardware RAID functionality.

Marvell 88SE9215 Chipset Decides Compatibility

The onboard 88SE9215 controller determines supported SATA speeds, port multiplier modes and boot-disk capability. It complies with SATA 3.0 and PCIe 2.0 specifications. Verify that your motherboard firmware recognises this chipset for boot support.

Highlights

  • Add four SATA 3.0 drives at 6.0 Gbps
  • Works with older SATA 1.5 and 3.0 Gbps drives
  • Marvell 88SE9215 chip for broad compatibility
  • Fits any PCIe x1, x4, x8 or x16 slot
  • Boot from SSD or HDD in AHCI mode

Specifications

No published specifications for this item yet.

Questions about this item

What free PCIe slot does the Marvell 88SE9215 card need?

The card fits any PCIe 1x, 4x, 8x or 16x slot; it will not work in a legacy PCI slot.

Will my existing SATA 2.0 and 1.0 drives run at full speed on this controller?

The card is backward compatible with 3.0 Gbps and 1.5 Gbps devices, so older drives operate at their native speeds.

How can I confirm the card is booting drives in AHCI mode after install?

Enter the BIOS and verify the controller shows AHCI 1.0 mode; the OS should then detect each attached SSD or HDD as a bootable device.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.