We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PWM fan hub with five 4-pin connectors and adhesive backing

Vszerda

Vszerda 4 Pin PWM Fan Hub Splitter Sleeved 1 to 5 Way internal power cable

SKU CH-4VQX-WZSHN

Expands one CPU fan header into five PWM connectors with a sleeved 35 cm cable and adhesive-backed hub for tidy case routing

  • Expands one CPU fan header to five ports for simultaneous control
  • 35 cm sleeved cable reaches across full-tower chassis
  • 22 AWG tinned copper conductors rated to 80 °C
  • Double-sided adhesive pad secures hub inside case
  • Large 4-pin D-type power connector draws current directly from PSU

Single-header PWM fan hub

The Vszerda PWM fan hub splits one motherboard 4-pin CPU fan header into five 3-pin or 4-pin fan connectors. A large 4-pin D-type power connector draws supply directly from the PSU, while the motherboard header carries the PWM signal for synchronised speed control. The 35 cm sleeved cable uses 22 AWG tinned-copper conductors rated to 80 °C. Adhesive backing secures the 5.8 cm by 1.8 cm hub inside the chassis.

Builders expanding a single CPU fan header

This hub suits builders who need to run up to five fans from one PWM header and prefer a tidy, centralised cable run. It is not for systems that require independent speed curves per fan, because all five connectors share the same PWM signal. Buyers needing motherboard-controlled RGB or addressable lighting headers should look elsewhere, as this cable carries only power and tachometer signals.

One motherboard PWM header drives five fans

The decisive specification is the 1-to-5 split from a single 4-pin CPU fan header with a supplemental PSU power tap. All five fans spin in unison under the motherboard PWM curve, so the hub works only when identical fan behaviour is acceptable.

Highlights

  • Expands one CPU fan header to five ports for simultaneous control
  • 35 cm sleeved cable reaches across full-tower chassis
  • 22 AWG tinned copper conductors rated to 80 °C
  • Double-sided adhesive pad secures hub inside case
  • Large 4-pin D-type power connector draws current directly from PSU

Specifications

No published specifications for this item yet.

Questions about this item

How many fans can the single PWM signal from the motherboard actually control on this hub?

The hub splits one motherboard 4-pin header into five fan connectors so all five fans receive the same PWM signal simultaneously.

Does the 22 AWG wiring and 80 °C rating handle continuous operation without overheating?

The 1007 22 AWG tinned-copper wires are rated to 80 °C, suitable for sustained fan power delivery inside a closed case.

Which existing connectors must my motherboard and power supply provide for this hub to work?

You need one free 4-pin CPU fan header on the motherboard and one spare large 4-pin D-type Molex connector from the power supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.