We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 18cm adapter cable with 4-pin Molex male to 6-pin PCI-E female connectors

Vszerda

Vszerda 4-Pin Molex to 6-Pin PCI-E Power Adapter Cable 18cm computer power cord

SKU CH-S4SA-SPP6C

Converts a 4-pin Molex connector to a 6-pin PCI-E graphics power plug using 18 cm of 18AWG UL1007 tinned-copper cable

  • Length18 centimeters
  • Connector Number4-pin Molex (Lp4) and 6-pin Pci-e
  • Connector Detail4-pin Molex (Lp4) and 6-pin Pci-e
  • Terminal Gender4-pin Molex (Lp4) and 6-pin Pci-e
  • Specifications4-pin Molex (Lp4) and 6-pin Pci-e, 18, centimeters, 1.0232,
  • ConductorPolyvinyl Chloride (PVC)
  • Converts Molex to 6-pin PCI-E power for modern graphics cards
  • 18 cm length keeps cable routing tidy inside compact cases
  • 18 AWG UL1007 tinned copper conductors deliver stable power to the GPU
  • Single adapter in the pack adds the required 6-pin connector instantly
  • PVC insulation protects wires during installation and daily use

Power Adapter for Legacy Supplies

This 18cm cable converts a 4-pin Molex LP4 connector into a 6-pin PCI-E power plug for graphics cards. It lets older or budget power supplies feed modern GPUs that require the dedicated 6-pin input. The short length keeps cable routing tidy inside compact cases.

Suits Builders With Molex-Only PSUs

Ideal for anyone adding a mid-range graphics card to a system whose power supply lacks native PCI-E connectors. Not for users whose PSU already provides 6-pin or 8-pin PCI-E leads, or for cards that draw more power than a single Molex rail can safely deliver.

Steady Delivery Through 18AWG Copper

Built with 18AWG tinned copper wire rated to UL1007, the adapter maintains stable current during extended gaming or compute sessions. PVC insulation resists heat buildup, so voltage drop stays low even when the GPU runs at full load for hours.

Highlights

  • Converts Molex to 6-pin PCI-E power for modern graphics cards
  • 18 cm length keeps cable routing tidy inside compact cases
  • 18 AWG UL1007 tinned copper conductors deliver stable power to the GPU
  • Single adapter in the pack adds the required 6-pin connector instantly
  • PVC insulation protects wires during installation and daily use

Specifications

BrandGGZZ
Length18 centimeters
Connector Number4-pin Molex (Lp4) and 6-pin Pci-e
Connector Detail4-pin Molex (Lp4) and 6-pin Pci-e
Terminal Gender4-pin Molex (Lp4) and 6-pin Pci-e
Specifications4-pin Molex (Lp4) and 6-pin Pci-e, 18, centimeters, 1.0232, millimeters
ConductorPolyvinyl Chloride (PVC)
ConstructionPolyvinyl Chloride (PVC), Copper
Features4-pin Molex (Lp4) and 6-pin Pci-e, GGZZ
Disclaimernot_applicable

Questions about this item

Do I need a spare 4-pin Molex connector from my power supply to use this 18 cm adapter?

Yes, the adapter plugs into a standard 4-pin Molex (LP4) lead from your PSU and provides a single 6-pin PCI-E connector for the graphics card.

Will this 18 cm cable reach a 6-pin PCI-E port on an older GPU if the Molex lead comes from the same PSU bundle?

The 18 cm length is short, so it works best when the Molex connector and the graphics card power socket are close together inside the case.

How can I confirm the adapter is delivering power correctly after I connect it?

The graphics card should power on without a "power insufficient" warning and run at its normal clock speeds instead of throttling down.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.