We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 35 cm DC plug splitting to three fan headers

Vszerda

Vszerda 35 cm 5.5×2.1 mm DC to 3× 3/4-pin fan power splitter cable

SKU CH-4RDQ-M2S4K

Splits one 5.5×2.1 mm DC jack into three 3-pin or 4-pin fan headers at 12 V, 35 cm long with moulded connectors and 22 AWG main wire

  • Runs three fans from one DC source using 5.5 × 2.1 mm plug
  • Compatible with both 3-pin and 4-pin case fans
  • 35 cm length fits tidy internal routing
  • Pure-copper 22 AWG main and 24 AWG branch wires
  • Moulded connectors add tensile strength for durable installation

35 cm DC fan splitter cable

This 35 cm adapter converts a single 5.5 mm x 2.1 mm DC power plug into three fan headers. It suits builders who want to run three 3-pin or 4-pin case fans from one 12 V DC source.

Simple push-on installation

Each branch connector presses onto standard fan headers without tools. The moulded junctions add tensile strength, but only two pins per header carry power so PWM speed control and tachometer feedback are not supported.

5.5 mm x 2.1 mm DC input

The splitter requires a 12 V DC supply with a 5.5 mm x 2.1 mm barrel jack. Builders needing motherboard PWM control or a different input connector should choose another solution.

Highlights

  • Runs three fans from one DC source using 5.5 × 2.1 mm plug
  • Compatible with both 3-pin and 4-pin case fans
  • 35 cm length fits tidy internal routing
  • Pure-copper 22 AWG main and 24 AWG branch wires
  • Moulded connectors add tensile strength for durable installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 5.5×2.1 mm DC splitter is delivering 12 V to all three fans after setup?

Connect the DC plug to a 12 V source, power the system, and verify each attached 3-pin or 4-pin fan spins; the cable carries power on two pins per branch so rotation confirms voltage is present.

What comes in the box and is any extra wiring required?

The package contains only the 35 cm splitter with a moulded 5.5×2.1 mm DC plug on one end and three fan headers on the other; no additional cables or adapters are included.

Should I choose a different length or gauge for my build?

This model is offered in a single 35 cm length with a 22 AWG main lead and 24 AWG branches; if a longer reach or heavier gauge is needed, a different cable must be sourced.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.