Vszerda 30cm ATX 24 Pin 18AWG Internal Power Cable

Extension Cable for Short PSU Leads

This 30 cm ATX 24-pin extender bridges the gap when a power supply cable cannot reach the motherboard socket. It connects a 24-pin male plug from the PSU to a 24-pin female receptacle on the board, solving length issues in larger chassis or routed builds. The locking design prevents accidental disconnection during assembly or transport. Installation requires the mains power to be switched off and unplugged before connecting.

Sustained Conductivity and Durability

Under continuous load the 18 AWG tinned copper conductors maintain stable current delivery thanks to low resistance and corrosion resistance. The PVC insulation jacket remains flexible for routing while protecting the wires from abrasion and oxidation over time. This construction supports reliable long-term operation without the voltage drop that thinner or inferior cables can exhibit. No active cooling or special mounting is required for the cable itself.

30 cm Length Determines Fit

The single specification that decides compatibility is the 30 cm overall cable length. Measure the distance from your PSU 24-pin output to the motherboard socket along the intended routing path; if the gap exceeds this figure the extender will not reach. Builds needing a longer run or a different pin count must select another cable, as this model provides only a 24-pin to 24-pin connection at the stated length.