We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with three Toslink inputs one output and IR remote sensor

Vszerda

Vszerda 3-port Toslink switch 3 in 1 out with IR remote

SKU CH-W49E-6B309

Routes three optical audio sources to one output with remote control, supports 5.1 Dolby/DTS and PCM up to 192 kHz, and runs 40 m without signal loss

  • Switch three optical sources to one output with the included IR remote
  • Transmit up to 40 m or 130 ft with only 0.2 dB/m loss
  • Hear 5.1-channel Dolby-AC3, DTS and PCM at 32, 44.1, 48 or 96 kHz
  • Plug-and-play SPDIF/Toslink switching with built-in ESD protection
  • No signal degradation across all supported sample rates including 192 kHz

Three-source optical switch

This Vszerda switch routes three Toslink sources into a single SPDIF input on a soundbar, AV receiver or amplifier. It is intended for listeners who need to toggle between a console, a Blu-ray player and a streamer without swapping cables. An infrared remote selects the active input from the sofa. The unit requires external power and ships new.

5.1-channel support with 40-metre reach

The switch passes Dolby Digital, DTS 5.1 and PCM stereo at sample rates of 32, 44.1, 48, 96 and 192 kHz without re-encoding. Optical attenuation is specified at .2 dB per metre, allowing clean runs up to 40 metres or 130 feet. It cannot carry 7.1 formats such as Dolby Digital Plus or Dolby TrueHD because those require HDMI bandwidth.

IR remote and ESD protection

A compact enclosure houses the three input ports and one output, all standard Toslink sockets that accept common optical cables. The included infrared remote eliminates the need to reach behind equipment when changing sources. Built-in electrostatic-discharge protection guards the circuitry from transient spikes during connection changes. No drivers or software configuration are required.

Highlights

  • Switch three optical sources to one output with the included IR remote
  • Transmit up to 40 m or 130 ft with only 0.2 dB/m loss
  • Hear 5.1-channel Dolby-AC3, DTS and PCM at 32, 44.1, 48 or 96 kHz
  • Plug-and-play SPDIF/Toslink switching with built-in ESD protection
  • No signal degradation across all supported sample rates including 192 kHz

Specifications

No published specifications for this item yet.

Questions about this item

Can I connect my older DVD player, game console and streaming box to this switch and send the signal to my soundbar?

Yes, the switch accepts three Toslink sources and routes the selected one to a single optical output, so older DVD players, consoles or streamers with optical ports can share one soundbar or AV receiver input.

How can I verify the switch is passing audio correctly after I hook it up?

Play a 5.1-channel Dolby Digital or DTS track from any connected source; the front-panel LED shows the active input and the receiver should report a 48 kHz or 96 kHz PCM or bitstream lock.

What cables and accessories come in the box versus what I must supply myself?

The package includes the switch unit and an IR remote; you must provide three Toslink cables for the sources and one Toslink cable for the output run to your amplifier or soundbar.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.