We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic fan hub with eight 3-pin ports and IDE 4-pin power input

Vszerda

Vszerda 3 Pin Chassis Fan Hub 1 to 8 IDE 4Pin internal power cable

SKU CH-8GYY-GWJ4C

A 3-pin fan hub splits one motherboard header into eight channels and draws 12V power from an IDE 4-pin connector

  • Connect up to 8 fans from one motherboard header
  • Powered directly by IDE 4-pin for stable 12 V supply
  • Manual three-speed switch for high, low or off
  • Double-sided adhesive tape secures hub inside the case
  • No PWM or RPM monitoring — simple voltage control only

What this hub does

The Vszerda fan hub splits one IDE 4-pin power connector into eight 3-pin fan headers so a desktop motherboard can drive more cooling fans than its own headers allow. It is built for 12 V operation and includes a manual switch for HIGH, LOW or OFF fan settings.

Check your fans and power

Each attached fan must be a 3-pin 12 V model; the hub has no PWM circuitry and cannot report fan speeds to the motherboard. The single IDE 4-pin plug draws all current from the power supply, so verify that the PSU can deliver enough current for the total number of fans you plan to connect.

Upgrade path and limits

This hub replaces the practice of daisy-chaining splitters or leaving case fans unplugged when header count runs out. The jump is worthwhile when you need more than the board provides and accept fixed-speed or manually switched operation; it is not suited for builds that require automatic PWM control or RPM monitoring.

Highlights

  • Connect up to 8 fans from one motherboard header
  • Powered directly by IDE 4-pin for stable 12 V supply
  • Manual three-speed switch for high, low or off
  • Double-sided adhesive tape secures hub inside the case
  • No PWM or RPM monitoring — simple voltage control only

Specifications

No published specifications for this item yet.

Questions about this item

Does the Vszerda fan hub ship with mounting hardware or must I buy it separately?

The hub includes built-in double-sided adhesive tape on the back for securing it inside the chassis; no extra brackets or screws are required.

How do I choose between the HIGH, LOW and OFF gear settings on this splitter?

Use HIGH for full 12V speed, LOW for reduced voltage and quieter operation, and OFF to stop the fans completely; note that some fans may not start on LOW and LED brightness drops at lower voltage.

What does the 12V rating mean once the hub is installed in my PC?

The hub draws 12V from the IDE 4Pin connector and distributes it to up to eight 3-pin fans, letting you run all channels from a single motherboard header without PWM or speed reporting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.