We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided cable with one female and three male 3-pin connectors

Vszerda

Vszerda 3-pin 1-to-3 fan splitter cable 10 inches

SKU CH-HNCY-VYSG2

Splits one 3-pin header into three fan connections using a 10-inch braided cable

  • Connect three 3-pin fans to one header
  • 10-inch length reaches fans without strain
  • Black braided sleeve protects and tidies cables
  • Fans run at full speed continuously
  • No PWM control — voltage-only operation

3-pin 1-to-3 fan splitter cable

This Vszerda cable connects three 3-pin case fans to a single motherboard header or power supply connector. It expands cooling capacity without requiring additional headers or a power supply upgrade. The black net jacket sleeving protects the wires during routing. Fans connected through this splitter run at full speed continuously.

Check header type and speed control needs

Verify that your motherboard or power supply provides a 3-pin fan header or matching male connector before ordering. This splitter does not support PWM control, so connected fans cannot be regulated by the motherboard. Ensure your fans are 3-pin models and that constant full-speed operation is acceptable for your build.

Constant full-speed operation under load

Because PWM control is not supported, all three attached fans spin at maximum RPM whenever the system is powered. This delivers consistent airflow during sustained workloads but produces constant noise levels. The 10-inch length allows flexible placement of fans within the case without straining connections.

Highlights

  • Connect three 3-pin fans to one header
  • 10-inch length reaches fans without strain
  • Black braided sleeve protects and tidies cables
  • Fans run at full speed continuously
  • No PWM control — voltage-only operation

Specifications

No published specifications for this item yet.

Questions about this item

What connectors come on the Vszerda splitter and do I need any extra cables?

The cable has one 3-pin female header for the motherboard or PSU and three 3-pin male headers for fans; no additional cables are required.

Should I choose this 10-inch 3-pin splitter or a different version?

This model is a 10-inch 1-to-3 3-pin splitter; if your fans use 3-pin connectors and the distance from the header to the fans fits within 10 inches, it is the correct choice.

What does "fans run in full speed" mean for my build?

The fans will spin at their maximum rated speed continuously because the splitter does not support PWM control.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.