We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved 3-pin Y splitter cable, 10 inches

Vszerda

Vszerda 3-pin 1-to-2 fan splitter sleeved cable 10 inches

SKU CH-JA5C-8JHDB

Connects two 3-pin fans to one motherboard header with a 10-inch sleeved cable, running both at full speed without PWM control

  • Connect two fans to one header with a single 1-to-2 splitter
  • 10-inch length gives flexible routing inside the case
  • Black net-jacket sleeving protects wires and looks tidy
  • Fans run at full speed for maximum airflow
  • No PWM support so speed control is not available

What this cable does

This Vszerda splitter connects two 3-pin case fans to a single motherboard header or power-supply connector. It is intended for builders who want to add an extra fan without using another header.

Critical specification

The cable carries only 3-pin power and tachometer signals, so the fans run at full speed and PWM control is not supported. Buyers who need variable speed control via a 4-pin header cannot use this part.

Behaviour under load

Both fans receive the same voltage continuously, so they spin at constant maximum RPM for as long as the system is powered. The 10-inch sleeved length keeps the wiring tidy during sustained operation.

Highlights

  • Connect two fans to one header with a single 1-to-2 splitter
  • 10-inch length gives flexible routing inside the case
  • Black net-jacket sleeving protects wires and looks tidy
  • Fans run at full speed for maximum airflow
  • No PWM support so speed control is not available

Specifications

No published specifications for this item yet.

Questions about this item

What happens to fan speed when two 3-pin fans are connected through this splitter?

Both fans receive the same voltage from the motherboard header, so they run at full speed continuously without any PWM-based speed control.

How does the 3-pin interface limit control compared to a 4-pin PWM header?

The 3-pin connection carries only power, ground and a tachometer signal, so the motherboard cannot send PWM duty-cycle commands; fan speed is fixed at the header voltage.

What clearance is required to route the 10-inch sleeved cable inside a case?

The black net-jacketed cable measures 10 inches from the motherboard header to the Y-split, so allow at least that much free path between the header and the two fan mounting points.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.