We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with three M.2 slots, PCIe x16 edge connector, two SATA ports, metal bracket, two red cables, silver screws

Vszerda

Vszerda 3 in 1 NGFF MSATA SSD Adapter Card sata cable

SKU CH-GACW-SG849

Adapts M.2 NVMe, M.2 SATA and mSATA SSDs to a PCIe x16 slot with two SATA 3.0 cables

  • Supports NVMe M.2, SATA M.2 and mSATA drives in one adapter
  • PCIe x16 slot input with two SATA 3.0 outputs for flexible connectivity
  • Dual 2 V and 3.3 V power with large tantalum capacitors for stable operation
  • Metal construction with low-profile bracket fits compact builds
  • Works with Windows 8, 10, Linux and iOS systems

Three-in-one SSD adapter card

The Vszerda adapter card fits a single PCIe x16 slot and accepts an M.2 M-key NVME drive, an M.2 B-key SATA drive and an mSATA drive simultaneously. Two SATA 3.0 cables connect the SATA-based drives to the motherboard. A low-profile bracket and screw kit are included for small-form-factor builds. The board uses a metal construction with a dual 3.3 V power circuit and a large tantalum capacitor.

Compatibility and limits

Builders who want to run three SSDs from one expansion slot without adding a separate controller card will find this useful. It is not suited for systems that lack a free PCIe x16 slot or for users who need to boot from an NVME drive on a motherboard without UEFI NVME support. Buyers who only have M.2 SATA drives and no mSATA or NVME devices gain no advantage over a simpler single-drive riser.

Installation notes

Insert the card into a PCIe x16 slot, secure it with the supplied bracket and screws, then attach the M.2 and mSATA drives using the provided standoffs. Connect the two SATA 3.0 cables from the card to motherboard SATA ports for the B-key and mSATA drives. The onboard work indicator confirms power delivery. A common issue is forgetting to enable the PCIe slot in BIOS, which leaves the NVME drive invisible to the operating system.

Highlights

  • Supports NVMe M.2, SATA M.2 and mSATA drives in one adapter
  • PCIe x16 slot input with two SATA 3.0 outputs for flexible connectivity
  • Dual 2 V and 3.3 V power with large tantalum capacitors for stable operation
  • Metal construction with low-profile bracket fits compact builds
  • Works with Windows 8, 10, Linux and iOS systems

Specifications

No published specifications for this item yet.

Questions about this item

Does my motherboard need a free PCIe x16 slot to install this adapter?

Yes, the adapter plugs into a PCIe x16 slot and also requires two SATA 3.0 data cables connected to the motherboard for the M.2 SATA and mSATA drives.

Will an NVMe drive on this card work at the same time as an older SATA SSD I keep in my PC?

The card provides a PCIe x16 link for the NVMe drive and two SATA 3.0 ports for the M.2 SATA and mSATA drives, so all three can operate alongside existing SATA devices.

How can I confirm the NVMe drive is detected at full PCIe x16 speed after setup?

Check the BIOS or OS device manager to verify the NVMe drive appears on a PCIe x16 link and that the SATA drives show on the two SATA 3.0 ports with the work indicator lit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.