We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with 3.5mm, RCA and Toslink ports, short fiber cable attached

Vszerda

Vszerda 3.5mm Digital to Analog Audio Converter Adapter with Fiber Cable RCA Out optical

SKU CH-2B9B-4JBV3

Converts coaxial or Toslink digital audio to analog stereo RCA with 24-bit, 96 kHz support and includes a fiber cable

  • Converts Coaxial or Toslink to analog stereo
  • Supports sampling rates of 32, 44.1, 48 and 96 KHz
  • Handles 24-bit S/PDIF incoming bit stream
  • Provides electromagnetic noise-free transmission
  • Compact 51 x 41 x 26 mm size for easy installation

Compact digital-to-analog audio converter

This Vszerda adapter converts Coaxial or Toslink digital audio signals into analog stereo output through dual RCA jacks. It accepts sampling rates of 32, 44.1, 48 and 96 KHz with 24-bit S/PDIF incoming bit streams. The unit measures 51 by 41 by 26 mm and operates from 0 to 70 °C.

Replaces a TV or source with only digital outputs

Use it when your amplifier, powered speakers or older receiver lack optical or coaxial inputs but provide RCA analogue inputs. The jump is worth it if the source device can be set to PCM output; compressed surround formats such as Dolby Digital or DTS will not be decoded and will produce noise or silence.

Limited to two-channel PCM over S/PDIF

The converter handles only stereo PCM at the listed sample rates and cannot process multi-channel bitstreams. It requires the source to output PCM rather than encoded surround sound. Electromagnetic noise-free transmission is provided over the included fibre cable, but the interface itself caps usable audio to two channels.

Highlights

  • Converts Coaxial or Toslink to analog stereo
  • Supports sampling rates of 32, 44.1, 48 and 96 KHz
  • Handles 24-bit S/PDIF incoming bit stream
  • Provides electromagnetic noise-free transmission
  • Compact 51 x 41 x 26 mm size for easy installation

Specifications

No published specifications for this item yet.

Questions about this item

Will the 51 x 41 x 26 mm converter fit behind my TV cabinet?

The unit measures 51 mm long, 41 mm wide and 26 mm high, so check your cabinet clearance against those dimensions.

How do I connect the Toslink and coaxial inputs, and what setting avoids noise?

Plug one digital source into the Toslink port or the coaxial RCA jack, then set the TV audio output to PCM to prevent fuzzy or high-pitch noise.

How often should I replace the included fiber cable?

The optical fiber cable has no moving parts and no specified lifespan; replace it only if the connectors are damaged or the signal drops.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.