We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter board with 40-pin IDE and SATA connectors

Vszerda

Vszerda 3.5" IDE 40-pin to SATA Converter Adapter

SKU CH-8ZKJ-WJ1ZB

Converts a 3.5 inch 40-pin IDE hard drive or optical drive to a SATA interface for motherboards with SATA ports, supporting IDE transfer rates up to 133 MB/s and drives up to 1000 GB.

  • Connect legacy IDE drives to SATA motherboards
  • Supports IDE transfer rates up to 133 MB/s
  • Works with 40-pin IDE devices up to 1000GB capacity
  • Plug-and-play installation requires no drivers or extra power
  • Jumper must be set to MASTER for correct operation

IDE 40-pin to SATA converter

This adapter connects a 3.5 inch IDE hard drive or optical drive to a SATA motherboard port. It supports legacy PATA devices up to 1000GB capacity. The unit operates without an external power supply and requires no driver installation. It is designed for desktop upgrades and legacy hardware integration.

Master jumper requirement

The IDE device jumper must be set to Master for the adapter to function correctly. Cable Select or Slave settings will prevent operation. This is a fixed hardware constraint of the converter board. Users must verify jumper position before installation.

Legacy desktop upgraders

Suitable for users converting older IDE storage to a SATA interface on compatible motherboards. It works with DOS, Windows 98 through Windows 7 and Linux systems. Not intended for hot-swap scenarios or laptop drives. Buyers needing hot-swap capability or 2.5 inch drive support should look elsewhere.

Highlights

  • Connect legacy IDE drives to SATA motherboards
  • Supports IDE transfer rates up to 133 MB/s
  • Works with 40-pin IDE devices up to 1000GB capacity
  • Plug-and-play installation requires no drivers or extra power
  • Jumper must be set to MASTER for correct operation

Specifications

No published specifications for this item yet.

Questions about this item

What real-world throughput does the 133 MB/s IDE rating deliver on a SATA motherboard?

The adapter supports IDE 66/100/133 MB/s standards, so the drive runs at its native IDE speed; the SATA link itself is not a bottleneck.

Does the 40-pin IDE connector work with any 3.5" drive up to 1000 GB without extra power?

Yes, it fits all 40-pin IDE devices up to 1000 GB and draws power from the drive's own Molex connector — no separate supply needed.

What jumper setting and physical space does the 3.5" PCB require to install?

The drive jumper must be set to MASTER; the board is a bare 3.5" PCBA that mounts in a standard 3.5" drive bay.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.